1969 Dodge Challenger vs. 1989 Mazda RX-7
To start off, 1989 Mazda RX-7 is newer by 20 year(s). Which means there will be less support and parts availability for 1969 Dodge Challenger. In addition, the cost of maintenance, including insurance, on 1969 Dodge Challenger would be higher. At 6,286 cc (8 cylinders), 1969 Dodge Challenger is equipped with a bigger engine. In terms of performance, both vehicles can yield 200 horse power. So under normal driving conditions, the acceleration of both vehicles should be relatively similar. With that said, vehicle weight also plays an important factor in acceleration. 1969 Dodge Challenger weights approximately 281 kg more than 1989 Mazda RX-7.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1969 Dodge Challenger (422 Nm @ 2800 RPM) has 158 more torque (in Nm) than 1989 Mazda RX-7. (264 Nm @ 3500 RPM). This means 1969 Dodge Challenger will have an easier job in driving up hills or pulling heavy equipment than 1989 Mazda RX-7.
Compare all specifications:
1969 Dodge Challenger | 1989 Mazda RX-7 | |
Make | Dodge | Mazda |
Model | Challenger | RX-7 |
Year Released | 1969 | 1989 |
Body Type | Convertible | Coupe |
Engine Position | Front | Front |
Engine Size | 6286 cc | 2614 cc |
Engine Type | in-line | dual-disk rotary |
Horse Power | 200 HP | 200 HP |
Engine RPM | 4400 RPM | 6500 RPM |
Torque | 422 Nm | 264 Nm |
Torque RPM | 2800 RPM | 3500 RPM |
Engine Compression Ratio | 9.0:1 | 9.0:1 |
Drive Type | Rear | Rear |
Number of Seats | 5 seats | 4 seats |
Number of Doors | 2 doors | 2 doors |
Vehicle Weight | 1566 kg | 1285 kg |
Vehicle Length | 4870 mm | 4340 mm |
Vehicle Width | 1940 mm | 1700 mm |
Vehicle Height | 1290 mm | 1270 mm |
Wheelbase Size | 2800 mm | 2430 mm |