1969 Fairthorpe TX-S vs. 1971 Holden Belmont

To start off, 1971 Holden Belmont is newer by 2 year(s). Which means there will be less support and parts availability for 1969 Fairthorpe TX-S. In addition, the cost of maintenance, including insurance, on 1969 Fairthorpe TX-S would be higher. At 2,833 cc (6 cylinders), 1971 Holden Belmont is equipped with a bigger engine. In terms of performance, 1971 Holden Belmont (116 HP @ 4400 RPM) has 4 more horse power than 1969 Fairthorpe TX-S. (112 HP @ 5300 RPM) In normal driving conditions, 1971 Holden Belmont should accelerate faster than 1969 Fairthorpe TX-S. With that said, vehicle weight also plays an important factor in acceleration. 1971 Holden Belmont weights approximately 553 kg more than 1969 Fairthorpe TX-S. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1971 Holden Belmont (228 Nm @ 2000 RPM) has 68 more torque (in Nm) than 1969 Fairthorpe TX-S. (160 Nm @ 3000 RPM). This means 1971 Holden Belmont will have an easier job in driving up hills or pulling heavy equipment than 1969 Fairthorpe TX-S.

Compare all specifications:

1969 Fairthorpe TX-S 1971 Holden Belmont
Make Fairthorpe Holden
Model TX-S Belmont
Year Released 1969 1971
Engine Position Front Front
Engine Size 1998 cc 2833 cc
Engine Cylinders 6 cylinders 6 cylinders
Engine Type in-line in-line
Horse Power 112 HP 116 HP
Engine RPM 5300 RPM 4400 RPM
Torque 160 Nm 228 Nm
Torque RPM 3000 RPM 2000 RPM
Drive Type Rear Rear
Vehicle Weight 787 kg 1340 kg
Vehicle Length 3730 mm 4770 mm
Vehicle Width 1530 mm 1890 mm
Vehicle Height 1140 mm 1380 mm
Wheelbase Size 2110 mm 2830 mm