1969 Holden Monaro vs. 1973 Mazda RX-3
To start off, 1973 Mazda RX-3 is newer by 4 year(s). Which means there will be less support and parts availability for 1969 Holden Monaro. In addition, the cost of maintenance, including insurance, on 1969 Holden Monaro would be higher. At 2,638 cc (6 cylinders), 1969 Holden Monaro is equipped with a bigger engine. In terms of performance, both vehicles can yield 100 horse power. So under normal driving conditions, the acceleration of both vehicles should be relatively similar. With that said, vehicle weight also plays an important factor in acceleration. 1969 Holden Monaro weights approximately 263 kg more than 1973 Mazda RX-3.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1969 Holden Monaro (213 Nm @ 2000 RPM) has 78 more torque (in Nm) than 1973 Mazda RX-3. (135 Nm @ 4000 RPM). This means 1969 Holden Monaro will have an easier job in driving up hills or pulling heavy equipment than 1973 Mazda RX-3.
Compare all specifications:
1969 Holden Monaro | 1973 Mazda RX-3 | |
Make | Holden | Mazda |
Model | Monaro | RX-3 |
Year Released | 1969 | 1973 |
Engine Position | Front | Front |
Engine Size | 2638 cc | 1964 cc |
Engine Type | in-line | dual-disk rotary |
Horse Power | 100 HP | 100 HP |
Engine RPM | 4000 RPM | 7000 RPM |
Torque | 213 Nm | 135 Nm |
Torque RPM | 2000 RPM | 4000 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Rear |
Vehicle Weight | 1115 kg | 852 kg |
Vehicle Length | 4700 mm | 4090 mm |
Vehicle Width | 1830 mm | 1600 mm |
Vehicle Height | 1400 mm | 1380 mm |
Wheelbase Size | 2830 mm | 2320 mm |