1969 Holden Monaro vs. 2010 Hyundai Genesis
To start off, 2010 Hyundai Genesis is newer by 41 year(s). Which means there will be less support and parts availability for 1969 Holden Monaro. In addition, the cost of maintenance, including insurance, on 1969 Holden Monaro would be higher. At 5,733 cc (8 cylinders), 1969 Holden Monaro is equipped with a bigger engine. In terms of performance, 1969 Holden Monaro (296 HP @ 4800 RPM) has 6 more horse power than 2010 Hyundai Genesis. (290 HP @ 6200 RPM). In normal driving conditions, 1969 Holden Monaro should accelerate faster than 2010 Hyundai Genesis. With that said, vehicle weight also plays an important factor in acceleration. 2010 Hyundai Genesis weights approximately 205 kg more than 1969 Holden Monaro.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1969 Holden Monaro (516 Nm @ 3200 RPM) has 158 more torque (in Nm) than 2010 Hyundai Genesis. (358 Nm @ 4500 RPM). This means 1969 Holden Monaro will have an easier job in driving up hills or pulling heavy equipment than 2010 Hyundai Genesis.
Compare all specifications:
1969 Holden Monaro | 2010 Hyundai Genesis | |
Make | Holden | Hyundai |
Model | Monaro | Genesis |
Year Released | 1969 | 2010 |
Engine Position | Front | Front |
Engine Size | 5733 cc | 3800 cc |
Engine Cylinders | 8 cylinders | 6 cylinders |
Engine Type | in-line | V |
Horse Power | 296 HP | 290 HP |
Engine RPM | 4800 RPM | 6200 RPM |
Torque | 516 Nm | 358 Nm |
Torque RPM | 3200 RPM | 4500 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Rear |
Vehicle Weight | 1495 kg | 1700 kg |
Vehicle Length | 4700 mm | 4976 mm |
Vehicle Width | 1840 mm | 1890 mm |
Vehicle Height | 1400 mm | 1476 mm |
Wheelbase Size | 2830 mm | 2936 mm |