1970 Abarth 1300 vs. 2000 Toyota Mark II
To start off, 2000 Toyota Mark II is newer by 30 year(s). Which means there will be less support and parts availability for 1970 Abarth 1300. In addition, the cost of maintenance, including insurance, on 1970 Abarth 1300 would be higher. At 1,988 cc (6 cylinders), 2000 Toyota Mark II is equipped with a bigger engine. In terms of performance, 2000 Toyota Mark II (156 HP @ 6200 RPM) has 33 more horse power than 1970 Abarth 1300. (123 HP @ 7200 RPM) In normal driving conditions, 2000 Toyota Mark II should accelerate faster than 1970 Abarth 1300. With that said, vehicle weight also plays an important factor in acceleration. 2000 Toyota Mark II weights approximately 780 kg more than 1970 Abarth 1300. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Let's talk about torque, 2000 Toyota Mark II (200 Nm @ 4400 RPM) has 70 more torque (in Nm) than 1970 Abarth 1300. (130 Nm @ 6000 RPM). This means 2000 Toyota Mark II will have an easier job in driving up hills or pulling heavy equipment than 1970 Abarth 1300.
Compare all specifications:
1970 Abarth 1300 | 2000 Toyota Mark II | |
Make | Abarth | Toyota |
Model | 1300 | Mark II |
Year Released | 1970 | 2000 |
Engine Position | Rear | Front |
Engine Size | 1279 cc | 1988 cc |
Engine Cylinders | 4 cylinders | 6 cylinders |
Engine Type | in-line | in-line |
Horse Power | 123 HP | 156 HP |
Engine RPM | 7200 RPM | 6200 RPM |
Torque | 130 Nm | 200 Nm |
Torque RPM | 6000 RPM | 4400 RPM |
Engine Bore Size | 76 mm | 75 mm |
Engine Stroke Size | 71 mm | 75 mm |
Engine Compression Ratio | 10.6:1 | 10.0:1 |
Fuel Type | Gasoline | Gasoline |
Number of Seats | 2 seats | 5 seats |
Vehicle Weight | 630 kg | 1410 kg |
Vehicle Length | 3560 mm | 4780 mm |
Vehicle Width | 1490 mm | 1770 mm |
Vehicle Height | 1140 mm | 1480 mm |
Wheelbase Size | 2100 mm | 2810 mm |