1970 Abarth 1300 vs. 2008 Chrysler PT Cruiser
To start off, 2008 Chrysler PT Cruiser is newer by 38 year(s). Which means there will be less support and parts availability for 1970 Abarth 1300. In addition, the cost of maintenance, including insurance, on 1970 Abarth 1300 would be higher. At 2,397 cc (4 cylinders), 2008 Chrysler PT Cruiser is equipped with a bigger engine. In terms of performance, 2008 Chrysler PT Cruiser (150 HP @ 5100 RPM) has 27 more horse power than 1970 Abarth 1300. (123 HP @ 7200 RPM) In normal driving conditions, 2008 Chrysler PT Cruiser should accelerate faster than 1970 Abarth 1300. With that said, vehicle weight also plays an important factor in acceleration. 2008 Chrysler PT Cruiser weights approximately 1185 kg more than 1970 Abarth 1300. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Let's talk about torque, 2008 Chrysler PT Cruiser (224 Nm @ 4000 RPM) has 94 more torque (in Nm) than 1970 Abarth 1300. (130 Nm @ 6000 RPM). This means 2008 Chrysler PT Cruiser will have an easier job in driving up hills or pulling heavy equipment than 1970 Abarth 1300.
Compare all specifications:
| 1970 Abarth 1300 | 2008 Chrysler PT Cruiser | |
| Make | Abarth | Chrysler |
| Model | 1300 | PT Cruiser |
| Year Released | 1970 | 2008 |
| Engine Position | Rear | Front |
| Engine Size | 1279 cc | 2397 cc |
| Engine Cylinders | 4 cylinders | 4 cylinders |
| Engine Type | in-line | in-line |
| Horse Power | 123 HP | 150 HP |
| Engine RPM | 7200 RPM | 5100 RPM |
| Torque | 130 Nm | 224 Nm |
| Torque RPM | 6000 RPM | 4000 RPM |
| Engine Bore Size | 76 mm | 87.5 mm |
| Engine Stroke Size | 71 mm | 101 mm |
| Engine Compression Ratio | 10.6:1 | 9.5:1 |
| Fuel Type | Gasoline | Gasoline |
| Number of Seats | 2 seats | 5 seats |
| Vehicle Weight | 630 kg | 1815 kg |
| Vehicle Length | 3560 mm | 4300 mm |
| Vehicle Width | 1490 mm | 1710 mm |
| Vehicle Height | 1140 mm | 1610 mm |
| Wheelbase Size | 2100 mm | 2620 mm |
