1970 AC 428 vs. 2008 Nissan X-Trail

To start off, 2008 Nissan X-Trail is newer by 38 year(s). Which means there will be less support and parts availability for 1970 AC 428. In addition, the cost of maintenance, including insurance, on 1970 AC 428 would be higher. At 7,003 cc (8 cylinders), 1970 AC 428 is equipped with a bigger engine. In terms of performance, 1970 AC 428 (298 HP @ 4600 RPM) has 186 more horse power than 2008 Nissan X-Trail. (112 HP @ 4000 RPM). In normal driving conditions, 1970 AC 428 should accelerate faster than 2008 Nissan X-Trail. With that said, vehicle weight also plays an important factor in acceleration. 2008 Nissan X-Trail weights approximately 81 kg more than 1970 AC 428.

Because 2008 Nissan X-Trail is four wheel drive (4WD), it will have significant more traction and grip than 1970 AC 428. In wet, icy, snow, or gravel driving conditions, 2008 Nissan X-Trail will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1970 AC 428 (640 Nm @ 2800 RPM) has 370 more torque (in Nm) than 2008 Nissan X-Trail. (270 Nm @ 2000 RPM). This means 1970 AC 428 will have an easier job in driving up hills or pulling heavy equipment than 2008 Nissan X-Trail.

Compare all specifications:

1970 AC 428 2008 Nissan X-Trail
Make AC Nissan
Model 428 X-Trail
Year Released 1970 2008
Engine Position Front Front
Engine Size 7003 cc 2183 cc
Engine Cylinders 8 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 298 HP 112 HP
Engine RPM 4600 RPM 4000 RPM
Torque 640 Nm 270 Nm
Torque RPM 2800 RPM 2000 RPM
Fuel Type Gasoline Diesel
Drive Type Rear 4WD
Transmission Type Manual Manual
Number of Seats 2 seats 5 seats
Number of Doors 2 doors 5 doors
Vehicle Weight 1430 kg 1511 kg
Vehicle Length 4430 mm 4460 mm
Vehicle Width 1710 mm 1770 mm
Vehicle Height 1310 mm 1760 mm
Wheelbase Size 2450 mm 2630 mm