1970 Alpine A 110 vs. 1955 Morgan 4
To start off, 1970 Alpine A 110 is newer by 15 year(s). Which means there will be less support and parts availability for 1955 Morgan 4. In addition, the cost of maintenance, including insurance, on 1955 Morgan 4 would be higher. At 1,296 cc (4 cylinders), 1970 Alpine A 110 is equipped with a bigger engine. In terms of performance, 1970 Alpine A 110 (118 HP @ 7200 RPM) has 85 more horse power than 1955 Morgan 4. (33 HP @ 4500 RPM). In normal driving conditions, 1970 Alpine A 110 should accelerate faster than 1955 Morgan 4. With that said, vehicle weight also plays an important factor in acceleration. 1955 Morgan 4 weights approximately 20 kg more than 1970 Alpine A 110.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1970 Alpine A 110 (122 Nm @ 4500 RPM) has 49 more torque (in Nm) than 1955 Morgan 4. (73 Nm @ 2100 RPM). This means 1970 Alpine A 110 will have an easier job in driving up hills or pulling heavy equipment than 1955 Morgan 4.
Compare all specifications:
| 1970 Alpine A 110 | 1955 Morgan 4 | |
| Make | Alpine | Morgan |
| Model | A 110 | 4 |
| Year Released | 1970 | 1955 |
| Engine Position | Rear | Front |
| Engine Size | 1296 cc | 1172 cc |
| Engine Cylinders | 4 cylinders | 4 cylinders |
| Engine Type | in-line | in-line |
| Horse Power | 118 HP | 33 HP |
| Engine RPM | 7200 RPM | 4500 RPM |
| Torque | 122 Nm | 73 Nm |
| Torque RPM | 4500 RPM | 2100 RPM |
| Drive Type | Rear | Rear |
| Transmission Type | Manual | Manual |
| Vehicle Weight | 630 kg | 650 kg |
| Vehicle Length | 3860 mm | 3670 mm |
| Vehicle Width | 1460 mm | 1430 mm |
| Vehicle Height | 1140 mm | 1300 mm |
| Wheelbase Size | 2110 mm | 2450 mm |
