1970 Alpine A 110 vs. 2010 Nissan NP300

To start off, 2010 Nissan NP300 is newer by 40 year(s). Which means there will be less support and parts availability for 1970 Alpine A 110. In addition, the cost of maintenance, including insurance, on 1970 Alpine A 110 would be higher. At 2,486 cc (4 cylinders), 2010 Nissan NP300 is equipped with a bigger engine. In terms of performance, 2010 Nissan NP300 (131 HP @ 3500 RPM) has 13 more horse power than 1970 Alpine A 110. (118 HP @ 7200 RPM) In normal driving conditions, 2010 Nissan NP300 should accelerate faster than 1970 Alpine A 110.

Because 2010 Nissan NP300 is four wheel drive (4WD), it will have significant more traction and grip than 1970 Alpine A 110. In wet, icy, snow, or gravel driving conditions, 2010 Nissan NP300 will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Nissan NP300 (304 Nm @ 2000 RPM) has 182 more torque (in Nm) than 1970 Alpine A 110. (122 Nm @ 4500 RPM). This means 2010 Nissan NP300 will have an easier job in driving up hills or pulling heavy equipment than 1970 Alpine A 110.

Compare all specifications:

1970 Alpine A 110 2010 Nissan NP300
Make Alpine Nissan
Model A 110 NP300
Year Released 1970 2010
Body Type Coupe Pickup
Engine Position Rear Front
Engine Size 1296 cc 2486 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 118 HP 131 HP
Engine RPM 7200 RPM 3500 RPM
Torque 122 Nm 304 Nm
Torque RPM 4500 RPM 2000 RPM
Engine Compression Ratio 12.0:1 16.5:1
Drive Type Rear 4WD
Transmission Type Manual Manual
Number of Seats 2 seats 2 seats
Number of Doors 2 doors 2 doors
Vehicle Length 3860 mm 5180 mm
Vehicle Width 1460 mm 1700 mm
Vehicle Height 1140 mm 1630 mm
Wheelbase Size 2110 mm 2960 mm
Fuel Tank Capacity 38 L 75 L