1970 Austin 3 vs. 1952 MG YB
To start off, 1970 Austin 3 is newer by 18 year(s). Which means there will be less support and parts availability for 1952 MG YB. In addition, the cost of maintenance, including insurance, on 1952 MG YB would be higher. At 2,910 cc (6 cylinders), 1970 Austin 3 is equipped with a bigger engine. In terms of performance, 1970 Austin 3 (123 HP @ 4500 RPM) has 78 more horse power than 1952 MG YB. (45 HP @ 4800 RPM). In normal driving conditions, 1970 Austin 3 should accelerate faster than 1952 MG YB. With that said, vehicle weight also plays an important factor in acceleration. 1970 Austin 3 weights approximately 430 kg more than 1952 MG YB. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1970 Austin 3 (218 Nm @ 3000 RPM) has 139 more torque (in Nm) than 1952 MG YB. (79 Nm @ 2400 RPM). This means 1970 Austin 3 will have an easier job in driving up hills or pulling heavy equipment than 1952 MG YB.
Compare all specifications:
| 1970 Austin 3 | 1952 MG YB | |
| Make | Austin | MG |
| Model | 3 | YB |
| Year Released | 1970 | 1952 |
| Engine Size | 2910 cc | 1250 cc |
| Engine Cylinders | 6 cylinders | 4 cylinders |
| Engine Type | in-line | in-line |
| Horse Power | 123 HP | 45 HP |
| Engine RPM | 4500 RPM | 4800 RPM |
| Torque | 218 Nm | 79 Nm |
| Torque RPM | 3000 RPM | 2400 RPM |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | Rear | Rear |
| Vehicle Weight | 1490 kg | 1060 kg |
| Vehicle Length | 4720 mm | 4170 mm |
| Vehicle Width | 1700 mm | 1510 mm |
| Vehicle Height | 1450 mm | 1450 mm |
| Wheelbase Size | 2910 mm | 2520 mm |
