1970 Daihatsu Fellow vs. 1974 Oldsmobile Cutlass
To start off, 1974 Oldsmobile Cutlass is newer by 4 year(s). Which means there will be less support and parts availability for 1970 Daihatsu Fellow. In addition, the cost of maintenance, including insurance, on 1970 Daihatsu Fellow would be higher. At 5,735 cc (8 cylinders), 1974 Oldsmobile Cutlass is equipped with a bigger engine. In terms of performance, 1974 Oldsmobile Cutlass (160 HP @ 4000 RPM) has 127 more horse power than 1970 Daihatsu Fellow. (33 HP @ 6500 RPM) In normal driving conditions, 1974 Oldsmobile Cutlass should accelerate faster than 1970 Daihatsu Fellow. With that said, vehicle weight also plays an important factor in acceleration. 1974 Oldsmobile Cutlass weights approximately 1115 kg more than 1970 Daihatsu Fellow. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1974 Oldsmobile Cutlass is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1974 Oldsmobile Cutlass. However, in wet, icy, snow, or gravel driving conditions, 1970 Daihatsu Fellow, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1974 Oldsmobile Cutlass (380 Nm @ 2400 RPM) has 342 more torque (in Nm) than 1970 Daihatsu Fellow. (38 Nm @ 5500 RPM). This means 1974 Oldsmobile Cutlass will have an easier job in driving up hills or pulling heavy equipment than 1970 Daihatsu Fellow. 1974 Oldsmobile Cutlass has automatic transmission and 1970 Daihatsu Fellow has manual transmission. 1970 Daihatsu Fellow will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1974 Oldsmobile Cutlass will be easier to drive especially in heavy traffic.
Compare all specifications:
1970 Daihatsu Fellow | 1974 Oldsmobile Cutlass | |
Make | Daihatsu | Oldsmobile |
Model | Fellow | Cutlass |
Year Released | 1970 | 1974 |
Engine Position | Front | Front |
Engine Size | 356 cc | 5735 cc |
Engine Cylinders | 2 cylinders | 8 cylinders |
Engine Type | in-line | in-line |
Horse Power | 33 HP | 160 HP |
Engine RPM | 6500 RPM | 4000 RPM |
Torque | 38 Nm | 380 Nm |
Torque RPM | 5500 RPM | 2400 RPM |
Engine Bore Size | 62 mm | 103.1 mm |
Engine Stroke Size | 59 mm | 85.9 mm |
Drive Type | Front | Rear |
Transmission Type | Manual | Automatic |
Vehicle Weight | 495 kg | 1610 kg |
Vehicle Length | 3000 mm | 5280 mm |
Vehicle Width | 1300 mm | 1960 mm |
Vehicle Height | 1260 mm | 1370 mm |
Wheelbase Size | 2100 mm | 2960 mm |