1970 Datsun 100A Cherry vs. 1980 Holden Statesman
To start off, 1980 Holden Statesman is newer by 10 year(s). Which means there will be less support and parts availability for 1970 Datsun 100A Cherry. In addition, the cost of maintenance, including insurance, on 1970 Datsun 100A Cherry would be higher. At 5,042 cc (8 cylinders), 1980 Holden Statesman is equipped with a bigger engine. In terms of performance, 1980 Holden Statesman (169 HP @ 4400 RPM) has 111 more horse power than 1970 Datsun 100A Cherry. (58 HP @ 6000 RPM) In normal driving conditions, 1980 Holden Statesman should accelerate faster than 1970 Datsun 100A Cherry. With that said, vehicle weight also plays an important factor in acceleration. 1980 Holden Statesman weights approximately 1077 kg more than 1970 Datsun 100A Cherry. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1980 Holden Statesman is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1980 Holden Statesman. However, in wet, icy, snow, or gravel driving conditions, 1970 Datsun 100A Cherry, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1980 Holden Statesman (361 Nm @ 2800 RPM) has 280 more torque (in Nm) than 1970 Datsun 100A Cherry. (81 Nm @ 4000 RPM). This means 1980 Holden Statesman will have an easier job in driving up hills or pulling heavy equipment than 1970 Datsun 100A Cherry. 1980 Holden Statesman has automatic transmission and 1970 Datsun 100A Cherry has manual transmission. 1970 Datsun 100A Cherry will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1980 Holden Statesman will be easier to drive especially in heavy traffic.
Compare all specifications:
1970 Datsun 100A Cherry | 1980 Holden Statesman | |
Make | Datsun | Holden |
Model | 100A Cherry | Statesman |
Year Released | 1970 | 1980 |
Engine Position | Front | Front |
Engine Size | 988 cc | 5042 cc |
Engine Cylinders | 4 cylinders | 8 cylinders |
Engine Type | in-line | in-line |
Horse Power | 58 HP | 169 HP |
Engine RPM | 6000 RPM | 4400 RPM |
Torque | 81 Nm | 361 Nm |
Torque RPM | 4000 RPM | 2800 RPM |
Drive Type | Front | Rear |
Transmission Type | Manual | Automatic |
Vehicle Weight | 645 kg | 1722 kg |
Vehicle Length | 3660 mm | 5160 mm |
Vehicle Width | 1480 mm | 1910 mm |
Vehicle Height | 1380 mm | 1410 mm |
Wheelbase Size | 2340 mm | 2900 mm |