1970 De Tomaso Pantera vs. 2010 Chevrolet Epica
To start off, 2010 Chevrolet Epica is newer by 40 year(s). Which means there will be less support and parts availability for 1970 De Tomaso Pantera. In addition, the cost of maintenance, including insurance, on 1970 De Tomaso Pantera would be higher. At 5,766 cc (8 cylinders), 1970 De Tomaso Pantera is equipped with a bigger engine. In terms of performance, 1970 De Tomaso Pantera (350 HP @ 6000 RPM) has 196 more horse power than 2010 Chevrolet Epica. (154 HP @ 5800 RPM). In normal driving conditions, 1970 De Tomaso Pantera should accelerate faster than 2010 Chevrolet Epica. With that said, vehicle weight also plays an important factor in acceleration. 2010 Chevrolet Epica weights approximately 193 kg more than 1970 De Tomaso Pantera.
Because 1970 De Tomaso Pantera is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1970 De Tomaso Pantera. However, in wet, icy, snow, or gravel driving conditions, 2010 Chevrolet Epica, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1970 De Tomaso Pantera (491 Nm @ 3500 RPM) has 254 more torque (in Nm) than 2010 Chevrolet Epica. (237 Nm @ 4000 RPM). This means 1970 De Tomaso Pantera will have an easier job in driving up hills or pulling heavy equipment than 2010 Chevrolet Epica. 2010 Chevrolet Epica has automatic transmission and 1970 De Tomaso Pantera has manual transmission. 1970 De Tomaso Pantera will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Chevrolet Epica will be easier to drive especially in heavy traffic.
Compare all specifications:
1970 De Tomaso Pantera | 2010 Chevrolet Epica | |
Make | De Tomaso | Chevrolet |
Model | Pantera | Epica |
Year Released | 1970 | 2010 |
Body Type | Coupe | Sedan |
Engine Position | Middle | Front |
Engine Size | 5766 cc | 2490 cc |
Engine Cylinders | 8 cylinders | 6 cylinders |
Engine Type | V | in-line |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 350 HP | 154 HP |
Engine RPM | 6000 RPM | 5800 RPM |
Torque | 491 Nm | 237 Nm |
Torque RPM | 3500 RPM | 4000 RPM |
Engine Bore Size | 101.6 mm | 77 mm |
Engine Stroke Size | 88.9 mm | 89.2 mm |
Engine Compression Ratio | 11.0:1 | 9.8:1 |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Number of Seats | 2 seats | 6 seats |
Number of Doors | 2 doors | 4 doors |
Vehicle Weight | 1382 kg | 1575 kg |
Vehicle Length | 4260 mm | 4810 mm |
Vehicle Width | 1810 mm | 1820 mm |
Vehicle Height | 1110 mm | 1460 mm |
Wheelbase Size | 2520 mm | 2710 mm |