1970 Fiat 124 vs. 1950 Jeep CJ3A
To start off, 1970 Fiat 124 is newer by 20 year(s). Which means there will be less support and parts availability for 1950 Jeep CJ3A. In addition, the cost of maintenance, including insurance, on 1950 Jeep CJ3A would be higher. At 2,199 cc (4 cylinders), 1950 Jeep CJ3A is equipped with a bigger engine. In terms of performance, 1970 Fiat 124 (95 HP @ 6000 RPM) has 36 more horse power than 1950 Jeep CJ3A. (59 HP @ 3600 RPM). In normal driving conditions, 1970 Fiat 124 should accelerate faster than 1950 Jeep CJ3A. With that said, vehicle weight also plays an important factor in acceleration. 1950 Jeep CJ3A weights approximately 150 kg more than 1970 Fiat 124.
Because 1950 Jeep CJ3A is four wheel drive (4WD), it will have significant more traction and grip than 1970 Fiat 124. In wet, icy, snow, or gravel driving conditions, 1950 Jeep CJ3A will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1950 Jeep CJ3A (145 Nm @ 3600 RPM) has 19 more torque (in Nm) than 1970 Fiat 124. (126 Nm @ 4000 RPM). This means 1950 Jeep CJ3A will have an easier job in driving up hills or pulling heavy equipment than 1970 Fiat 124.
Compare all specifications:
1970 Fiat 124 | 1950 Jeep CJ3A | |
Make | Fiat | Jeep |
Model | 124 | CJ3A |
Year Released | 1970 | 1950 |
Engine Position | Front | Front |
Engine Size | 1592 cc | 2199 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 95 HP | 59 HP |
Engine RPM | 6000 RPM | 3600 RPM |
Torque | 126 Nm | 145 Nm |
Torque RPM | 4000 RPM | 3600 RPM |
Drive Type | Rear | 4WD |
Transmission Type | Manual | Manual |
Vehicle Weight | 960 kg | 1110 kg |
Vehicle Length | 4070 mm | 3130 mm |
Vehicle Width | 1620 mm | 1460 mm |
Vehicle Height | 1430 mm | 1630 mm |
Wheelbase Size | 2430 mm | 2040 mm |