1970 Fiat 125 vs. 1973 Chrysler 160

To start off, 1973 Chrysler 160 is newer by 3 year(s). Which means there will be less support and parts availability for 1970 Fiat 125. In addition, the cost of maintenance, including insurance, on 1970 Fiat 125 would be higher. At 1,981 cc (4 cylinders), 1973 Chrysler 160 is equipped with a bigger engine. In terms of performance, 1973 Chrysler 160 (108 HP @ 5800 RPM) has 18 more horse power than 1970 Fiat 125. (90 HP @ 5600 RPM) In normal driving conditions, 1973 Chrysler 160 should accelerate faster than 1970 Fiat 125. With that said, vehicle weight also plays an important factor in acceleration. 1973 Chrysler 160 weights approximately 155 kg more than 1970 Fiat 125. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1973 Chrysler 160 (163 Nm @ 3200 RPM) has 32 more torque (in Nm) than 1970 Fiat 125. (131 Nm @ 4000 RPM). This means 1973 Chrysler 160 will have an easier job in driving up hills or pulling heavy equipment than 1970 Fiat 125. 1973 Chrysler 160 has automatic transmission and 1970 Fiat 125 has manual transmission. 1970 Fiat 125 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1973 Chrysler 160 will be easier to drive especially in heavy traffic.

Compare all specifications:

1970 Fiat 125 1973 Chrysler 160
Make Fiat Chrysler
Model 125 160
Year Released 1970 1973
Engine Position Front Front
Engine Size 1607 cc 1981 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 90 HP 108 HP
Engine RPM 5600 RPM 5800 RPM
Torque 131 Nm 163 Nm
Torque RPM 4000 RPM 3200 RPM
Engine Bore Size 80 mm 91.7 mm
Engine Stroke Size 80 mm 75 mm
Engine Compression Ratio 8.8:1 9.5:1
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Transmission Type Manual Automatic
Number of Seats 5 seats 5 seats
Vehicle Weight 960 kg 1115 kg
Vehicle Length 4230 mm 4540 mm
Vehicle Width 1610 mm 1730 mm
Vehicle Height 1450 mm 1440 mm
Wheelbase Size 2430 mm 2680 mm