1970 Ford Cortina vs. 1980 Isuzu Gemini
To start off, 1980 Isuzu Gemini is newer by 10 year(s). Which means there will be less support and parts availability for 1970 Ford Cortina. In addition, the cost of maintenance, including insurance, on 1970 Ford Cortina would be higher. At 1,599 cc (4 cylinders), 1970 Ford Cortina is equipped with a bigger engine. In terms of performance, 1980 Isuzu Gemini (79 HP @ 5200 RPM) has 11 more horse power than 1970 Ford Cortina. (68 HP @ 5200 RPM) In normal driving conditions, 1980 Isuzu Gemini should accelerate faster than 1970 Ford Cortina. With that said, vehicle weight also plays an important factor in acceleration. 1970 Ford Cortina weights approximately 20 kg more than 1980 Isuzu Gemini.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1980 Isuzu Gemini (116 Nm @ 3200 RPM) has 1 more torque (in Nm) than 1970 Ford Cortina. (115 Nm @ 2600 RPM). This means 1980 Isuzu Gemini will have an easier job in driving up hills or pulling heavy equipment than 1970 Ford Cortina.
Compare all specifications:
1970 Ford Cortina | 1980 Isuzu Gemini | |
Make | Ford | Isuzu |
Model | Cortina | Gemini |
Year Released | 1970 | 1980 |
Engine Position | Front | Front |
Engine Size | 1599 cc | 1582 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 68 HP | 79 HP |
Engine RPM | 5200 RPM | 5200 RPM |
Torque | 115 Nm | 116 Nm |
Torque RPM | 2600 RPM | 3200 RPM |
Drive Type | Rear | Rear |
Transmission Type | Manual | Manual |
Number of Seats | 5 seats | 5 seats |
Vehicle Weight | 960 kg | 940 kg |
Vehicle Length | 4270 mm | 4240 mm |
Vehicle Width | 1710 mm | 1580 mm |
Vehicle Height | 1330 mm | 1370 mm |
Wheelbase Size | 2570 mm | 2410 mm |