1970 Holden Monaro vs. 1985 Jeep CJ

To start off, 1985 Jeep CJ is newer by 15 year(s). Which means there will be less support and parts availability for 1970 Holden Monaro. In addition, the cost of maintenance, including insurance, on 1970 Holden Monaro would be higher. At 2,636 cc (6 cylinders), 1970 Holden Monaro is equipped with a bigger engine. In terms of performance, 1970 Holden Monaro (112 HP @ 4400 RPM) has 27 more horse power than 1985 Jeep CJ. (85 HP @ 5000 RPM). In normal driving conditions, 1970 Holden Monaro should accelerate faster than 1985 Jeep CJ. With that said, vehicle weight also plays an important factor in acceleration. 1970 Holden Monaro weights approximately 19 kg more than 1985 Jeep CJ. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1985 Jeep CJ is four wheel drive (4WD), it will have significant more traction and grip than 1970 Holden Monaro. In wet, icy, snow, or gravel driving conditions, 1985 Jeep CJ will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1970 Holden Monaro (213 Nm @ 2000 RPM) has 63 more torque (in Nm) than 1985 Jeep CJ. (150 Nm @ 2750 RPM). This means 1970 Holden Monaro will have an easier job in driving up hills or pulling heavy equipment than 1985 Jeep CJ.

Compare all specifications:

1970 Holden Monaro 1985 Jeep CJ
Make Holden Jeep
Model Monaro CJ
Year Released 1970 1985
Engine Position Front Front
Engine Size 2636 cc 1995 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 112 HP 85 HP
Engine RPM 4400 RPM 5000 RPM
Torque 213 Nm 150 Nm
Torque RPM 2000 RPM 2750 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear 4WD
Transmission Type Manual Manual
Vehicle Weight 1315 kg 1296 kg
Vehicle Length 4700 mm 3900 mm
Vehicle Width 1840 mm 1670 mm
Vehicle Height 1400 mm 1840 mm
Wheelbase Size 2830 mm 2380 mm