1970 Lancia Fulvia vs. 2002 Rolls-Royce Park Ward
To start off, 2002 Rolls-Royce Park Ward is newer by 32 year(s). Which means there will be less support and parts availability for 1970 Lancia Fulvia. In addition, the cost of maintenance, including insurance, on 1970 Lancia Fulvia would be higher. At 5,377 cc (12 cylinders), 2002 Rolls-Royce Park Ward is equipped with a bigger engine. In terms of performance, 2002 Rolls-Royce Park Ward (322 HP @ 5000 RPM) has 210 more horse power than 1970 Lancia Fulvia. (112 HP @ 6000 RPM) In normal driving conditions, 2002 Rolls-Royce Park Ward should accelerate faster than 1970 Lancia Fulvia. With that said, vehicle weight also plays an important factor in acceleration. 2002 Rolls-Royce Park Ward weights approximately 1400 kg more than 1970 Lancia Fulvia. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2002 Rolls-Royce Park Ward is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2002 Rolls-Royce Park Ward. However, in wet, icy, snow, or gravel driving conditions, 1970 Lancia Fulvia, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2002 Rolls-Royce Park Ward (499 Nm @ 3900 RPM) has 346 more torque (in Nm) than 1970 Lancia Fulvia. (153 Nm @ 4500 RPM). This means 2002 Rolls-Royce Park Ward will have an easier job in driving up hills or pulling heavy equipment than 1970 Lancia Fulvia. 2002 Rolls-Royce Park Ward has automatic transmission and 1970 Lancia Fulvia has manual transmission. 1970 Lancia Fulvia will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2002 Rolls-Royce Park Ward will be easier to drive especially in heavy traffic.
Compare all specifications:
1970 Lancia Fulvia | 2002 Rolls-Royce Park Ward | |
Make | Lancia | Rolls-Royce |
Model | Fulvia | Park Ward |
Year Released | 1970 | 2002 |
Body Type | Coupe | Sedan |
Engine Position | Front | Front |
Engine Size | 1584 cc | 5377 cc |
Engine Cylinders | 4 cylinders | 12 cylinders |
Engine Type | in-line | V |
Horse Power | 112 HP | 322 HP |
Engine RPM | 6000 RPM | 5000 RPM |
Torque | 153 Nm | 499 Nm |
Torque RPM | 4500 RPM | 3900 RPM |
Engine Bore Size | 82 mm | 85 mm |
Engine Stroke Size | 75 mm | 79 mm |
Engine Compression Ratio | 10.5:1 | 10.0:1 |
Fuel Type | Gasoline | Gasoline |
Drive Type | Front | Rear |
Transmission Type | Manual | Automatic |
Number of Seats | 4 seats | 4 seats |
Number of Doors | 2 doors | 4 doors |
Vehicle Weight | 1000 kg | 2400 kg |
Vehicle Length | 3990 mm | 5650 mm |
Vehicle Width | 1570 mm | 1940 mm |
Vehicle Height | 1330 mm | 1520 mm |
Wheelbase Size | 2340 mm | 3360 mm |
Fuel Tank Capacity | 38 L | 100 L |