1970 Oldsmobile Cutlass vs. 2010 Nissan Livina
To start off, 2010 Nissan Livina is newer by 40 year(s). Which means there will be less support and parts availability for 1970 Oldsmobile Cutlass. In addition, the cost of maintenance, including insurance, on 1970 Oldsmobile Cutlass would be higher. At 5,735 cc (8 cylinders), 1970 Oldsmobile Cutlass is equipped with a bigger engine. In terms of performance, 1970 Oldsmobile Cutlass (160 HP @ 4000 RPM) has 52 more horse power than 2010 Nissan Livina. (108 HP @ 6000 RPM). In normal driving conditions, 1970 Oldsmobile Cutlass should accelerate faster than 2010 Nissan Livina. With that said, vehicle weight also plays an important factor in acceleration. 1970 Oldsmobile Cutlass weights approximately 281 kg more than 2010 Nissan Livina. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1970 Oldsmobile Cutlass is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1970 Oldsmobile Cutlass. However, in wet, icy, snow, or gravel driving conditions, 2010 Nissan Livina, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1970 Oldsmobile Cutlass (380 Nm @ 2400 RPM) has 227 more torque (in Nm) than 2010 Nissan Livina. (153 Nm @ 4400 RPM). This means 1970 Oldsmobile Cutlass will have an easier job in driving up hills or pulling heavy equipment than 2010 Nissan Livina. 1970 Oldsmobile Cutlass has automatic transmission and 2010 Nissan Livina has manual transmission. 2010 Nissan Livina will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1970 Oldsmobile Cutlass will be easier to drive especially in heavy traffic.
Compare all specifications:
1970 Oldsmobile Cutlass | 2010 Nissan Livina | |
Make | Oldsmobile | Nissan |
Model | Cutlass | Livina |
Year Released | 1970 | 2010 |
Engine Position | Front | Front |
Engine Size | 5735 cc | 1597 cc |
Engine Cylinders | 8 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 160 HP | 108 HP |
Engine RPM | 4000 RPM | 6000 RPM |
Torque | 380 Nm | 153 Nm |
Torque RPM | 2400 RPM | 4400 RPM |
Engine Bore Size | 103.1 mm | 78 mm |
Engine Stroke Size | 85.9 mm | 83.6 mm |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Front |
Transmission Type | Automatic | Manual |
Vehicle Weight | 1610 kg | 1329 kg |
Vehicle Length | 5280 mm | 4190 mm |
Vehicle Width | 1960 mm | 1700 mm |
Vehicle Height | 1370 mm | 1580 mm |
Wheelbase Size | 2960 mm | 2610 mm |