1970 Oldsmobile Cutlass vs. 2013 Kia RIO
To start off, 2013 Kia RIO is newer by 43 year(s). Which means there will be less support and parts availability for 1970 Oldsmobile Cutlass. In addition, the cost of maintenance, including insurance, on 1970 Oldsmobile Cutlass would be higher. At 5,735 cc (8 cylinders), 1970 Oldsmobile Cutlass is equipped with a bigger engine. In terms of performance, 1970 Oldsmobile Cutlass (160 HP @ 4000 RPM) has 24 more horse power than 2013 Kia RIO. (136 HP @ 6300 RPM). In normal driving conditions, 1970 Oldsmobile Cutlass should accelerate faster than 2013 Kia RIO. With that said, vehicle weight also plays an important factor in acceleration. 1970 Oldsmobile Cutlass weights approximately 514 kg more than 2013 Kia RIO. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1970 Oldsmobile Cutlass is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1970 Oldsmobile Cutlass. However, in wet, icy, snow, or gravel driving conditions, 2013 Kia RIO, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1970 Oldsmobile Cutlass (380 Nm @ 2400 RPM) has 213 more torque (in Nm) than 2013 Kia RIO. (167 Nm @ 4850 RPM). This means 1970 Oldsmobile Cutlass will have an easier job in driving up hills or pulling heavy equipment than 2013 Kia RIO. 1970 Oldsmobile Cutlass has automatic transmission and 2013 Kia RIO has manual transmission. 2013 Kia RIO will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1970 Oldsmobile Cutlass will be easier to drive especially in heavy traffic.
Compare all specifications:
1970 Oldsmobile Cutlass | 2013 Kia RIO | |
Make | Oldsmobile | Kia |
Model | Cutlass | RIO |
Year Released | 1970 | 2013 |
Engine Position | Front | Front |
Engine Size | 5735 cc | 1600 cc |
Engine Cylinders | 8 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 160 HP | 136 HP |
Engine RPM | 4000 RPM | 6300 RPM |
Torque | 380 Nm | 167 Nm |
Torque RPM | 2400 RPM | 4850 RPM |
Engine Bore Size | 103.1 mm | 77 mm |
Engine Stroke Size | 85.9 mm | 85 mm |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Front |
Transmission Type | Automatic | 6-speed manual |
Vehicle Weight | 1610 kg | 1096 kg |
Vehicle Length | 5280 mm | 4045 mm |
Vehicle Width | 1960 mm | 1720 mm |
Vehicle Height | 1370 mm | 1455 mm |
Wheelbase Size | 2960 mm | 2570 mm |