1971 Alfa Romeo Cuneo vs. 1983 Holden Gemini

To start off, 1983 Holden Gemini is newer by 12 year(s). Which means there will be less support and parts availability for 1971 Alfa Romeo Cuneo. In addition, the cost of maintenance, including insurance, on 1971 Alfa Romeo Cuneo would be higher. At 1,995 cc (8 cylinders), 1971 Alfa Romeo Cuneo is equipped with a bigger engine. In terms of performance, 1971 Alfa Romeo Cuneo (230 HP @ 8800 RPM) has 164 more horse power than 1983 Holden Gemini. (66 HP @ 5400 RPM). In normal driving conditions, 1971 Alfa Romeo Cuneo should accelerate faster than 1983 Holden Gemini. With that said, vehicle weight also plays an important factor in acceleration. 1971 Alfa Romeo Cuneo weights approximately 93 kg more than 1983 Holden Gemini. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1971 Alfa Romeo Cuneo (183 Nm @ 7000 RPM) has 73 more torque (in Nm) than 1983 Holden Gemini. (110 Nm @ 3200 RPM). This means 1971 Alfa Romeo Cuneo will have an easier job in driving up hills or pulling heavy equipment than 1983 Holden Gemini.

Compare all specifications:

1971 Alfa Romeo Cuneo 1983 Holden Gemini
Make Alfa Romeo Holden
Model Cuneo Gemini
Year Released 1971 1983
Engine Position Middle Front
Engine Size 1995 cc 1584 cc
Engine Cylinders 8 cylinders 4 cylinders
Engine Type V in-line
Horse Power 230 HP 66 HP
Engine RPM 8800 RPM 5400 RPM
Torque 183 Nm 110 Nm
Torque RPM 7000 RPM 3200 RPM
Drive Type Rear Rear
Transmission Type Manual Manual
Vehicle Weight 1048 kg 955 kg
Vehicle Length 4110 mm 4250 mm
Vehicle Width 1810 mm 1580 mm
Vehicle Height 910 mm 1340 mm
Wheelbase Size 2360 mm 2410 mm