1971 Alfa Romeo Cuneo vs. 1989 Daihatsu Applause
To start off, 1989 Daihatsu Applause is newer by 18 year(s). Which means there will be less support and parts availability for 1971 Alfa Romeo Cuneo. In addition, the cost of maintenance, including insurance, on 1971 Alfa Romeo Cuneo would be higher. At 1,995 cc (8 cylinders), 1971 Alfa Romeo Cuneo is equipped with a bigger engine. In terms of performance, 1971 Alfa Romeo Cuneo (230 HP @ 8800 RPM) has 126 more horse power than 1989 Daihatsu Applause. (104 HP @ 6000 RPM). In normal driving conditions, 1971 Alfa Romeo Cuneo should accelerate faster than 1989 Daihatsu Applause. With that said, vehicle weight also plays an important factor in acceleration. 1971 Alfa Romeo Cuneo weights approximately 58 kg more than 1989 Daihatsu Applause. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1971 Alfa Romeo Cuneo is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1971 Alfa Romeo Cuneo. However, in wet, icy, snow, or gravel driving conditions, 1989 Daihatsu Applause, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1971 Alfa Romeo Cuneo (183 Nm @ 7000 RPM) has 49 more torque (in Nm) than 1989 Daihatsu Applause. (134 Nm @ 4800 RPM). This means 1971 Alfa Romeo Cuneo will have an easier job in driving up hills or pulling heavy equipment than 1989 Daihatsu Applause. 1989 Daihatsu Applause has automatic transmission and 1971 Alfa Romeo Cuneo has manual transmission. 1971 Alfa Romeo Cuneo will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1989 Daihatsu Applause will be easier to drive especially in heavy traffic.
Compare all specifications:
| 1971 Alfa Romeo Cuneo | 1989 Daihatsu Applause | |
| Make | Alfa Romeo | Daihatsu |
| Model | Cuneo | Applause |
| Year Released | 1971 | 1989 |
| Engine Position | Middle | Front |
| Engine Size | 1995 cc | 1590 cc |
| Engine Cylinders | 8 cylinders | 4 cylinders |
| Engine Type | V | in-line |
| Horse Power | 230 HP | 104 HP |
| Engine RPM | 8800 RPM | 6000 RPM |
| Torque | 183 Nm | 134 Nm |
| Torque RPM | 7000 RPM | 4800 RPM |
| Engine Bore Size | 78.1 mm | 76 mm |
| Engine Stroke Size | 52.2 mm | 87.6 mm |
| Engine Compression Ratio | 10.0:1 | 9.5:1 |
| Drive Type | Rear | Front |
| Transmission Type | Manual | Automatic |
| Number of Seats | 2 seats | 5 seats |
| Number of Doors | 2 doors | 5 doors |
| Vehicle Weight | 1048 kg | 990 kg |
| Vehicle Length | 4110 mm | 4270 mm |
| Vehicle Width | 1810 mm | 1670 mm |
| Vehicle Height | 910 mm | 1380 mm |
| Wheelbase Size | 2360 mm | 2480 mm |
