1971 Alfa Romeo Cuneo vs. 1998 Chrysler Concorde
To start off, 1998 Chrysler Concorde is newer by 27 year(s). Which means there will be less support and parts availability for 1971 Alfa Romeo Cuneo. In addition, the cost of maintenance, including insurance, on 1971 Alfa Romeo Cuneo would be higher. At 3,518 cc (6 cylinders), 1998 Chrysler Concorde is equipped with a bigger engine. In terms of performance, 1998 Chrysler Concorde (234 HP @ 6000 RPM) has 4 more horse power than 1971 Alfa Romeo Cuneo. (230 HP @ 8800 RPM) In normal driving conditions, 1998 Chrysler Concorde should accelerate faster than 1971 Alfa Romeo Cuneo. With that said, vehicle weight also plays an important factor in acceleration. 1998 Chrysler Concorde weights approximately 557 kg more than 1971 Alfa Romeo Cuneo. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1971 Alfa Romeo Cuneo is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1971 Alfa Romeo Cuneo. However, in wet, icy, snow, or gravel driving conditions, 1998 Chrysler Concorde, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1998 Chrysler Concorde (327 Nm @ 4400 RPM) has 144 more torque (in Nm) than 1971 Alfa Romeo Cuneo. (183 Nm @ 7000 RPM). This means 1998 Chrysler Concorde will have an easier job in driving up hills or pulling heavy equipment than 1971 Alfa Romeo Cuneo. 1998 Chrysler Concorde has automatic transmission and 1971 Alfa Romeo Cuneo has manual transmission. 1971 Alfa Romeo Cuneo will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1998 Chrysler Concorde will be easier to drive especially in heavy traffic.
Compare all specifications:
| 1971 Alfa Romeo Cuneo | 1998 Chrysler Concorde | |
| Make | Alfa Romeo | Chrysler |
| Model | Cuneo | Concorde |
| Year Released | 1971 | 1998 |
| Engine Position | Middle | Front |
| Engine Size | 1995 cc | 3518 cc |
| Engine Cylinders | 8 cylinders | 6 cylinders |
| Engine Type | V | V |
| Horse Power | 230 HP | 234 HP |
| Engine RPM | 8800 RPM | 6000 RPM |
| Torque | 183 Nm | 327 Nm |
| Torque RPM | 7000 RPM | 4400 RPM |
| Engine Bore Size | 78.1 mm | 96 mm |
| Engine Stroke Size | 52.2 mm | 81 mm |
| Engine Compression Ratio | 10.0:1 | 9.9:1 |
| Drive Type | Rear | Front |
| Transmission Type | Manual | Automatic |
| Number of Seats | 2 seats | 5 seats |
| Number of Doors | 2 doors | 4 doors |
| Vehicle Weight | 1048 kg | 1605 kg |
| Vehicle Length | 4110 mm | 5280 mm |
| Vehicle Width | 1810 mm | 1900 mm |
| Vehicle Height | 910 mm | 1420 mm |
| Wheelbase Size | 2360 mm | 2880 mm |
