1971 Austin 3 vs. 2008 Toyota Camry
To start off, 2008 Toyota Camry is newer by 37 year(s). Which means there will be less support and parts availability for 1971 Austin 3. In addition, the cost of maintenance, including insurance, on 1971 Austin 3 would be higher. At 2,910 cc (6 cylinders), 1971 Austin 3 is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 1971 Austin 3 weights approximately 104 kg more than 2008 Toyota Camry.
Because 1971 Austin 3 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1971 Austin 3. However, in wet, icy, snow, or gravel driving conditions, 2008 Toyota Camry, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, both vehicles can yield 218 Nm of torque. So under normal driving conditions, the ability to climb up hills and pull heavy equipment should be relatively similar for both vehicles.
Compare all specifications:
1971 Austin 3 | 2008 Toyota Camry | |
Make | Austin | Toyota |
Model | 3 | Camry |
Year Released | 1971 | 2008 |
Body Type | Sedan | Sedan |
Engine Position | Front | Front |
Engine Size | 2910 cc | 2361 cc |
Engine Cylinders | 6 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 123 HP | 0 HP |
Torque | 218 Nm | 218 Nm |
Torque RPM | 3000 RPM | 4000 RPM |
Engine Bore Size | 83.4 mm | 88.5 mm |
Engine Stroke Size | 88.9 mm | 96 mm |
Engine Compression Ratio | 9.0:1 | 9.6:1 |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Front |
Number of Seats | 5 seats | 5 seats |
Number of Doors | 4 doors | 4 doors |
Vehicle Weight | 1490 kg | 1386 kg |
Vehicle Length | 4720 mm | 4710 mm |
Vehicle Height | 1450 mm | 1490 mm |
Wheelbase Size | 2940 mm | 2730 mm |
Fuel Tank Capacity | 65 L | 70 L |