1971 Holden Monaro vs. 1980 Toyota Cressida

To start off, 1980 Toyota Cressida is newer by 9 year(s). Which means there will be less support and parts availability for 1971 Holden Monaro. In addition, the cost of maintenance, including insurance, on 1971 Holden Monaro would be higher. At 4,141 cc (8 cylinders), 1971 Holden Monaro is equipped with a bigger engine. In terms of performance, 1971 Holden Monaro (182 HP @ 4400 RPM) has 116 more horse power than 1980 Toyota Cressida. (66 HP @ 4200 RPM). In normal driving conditions, 1971 Holden Monaro should accelerate faster than 1980 Toyota Cressida. With that said, vehicle weight also plays an important factor in acceleration. 1971 Holden Monaro weights approximately 120 kg more than 1980 Toyota Cressida. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1971 Holden Monaro (356 Nm @ 2400 RPM) has 224 more torque (in Nm) than 1980 Toyota Cressida. (132 Nm @ 2400 RPM). This means 1971 Holden Monaro will have an easier job in driving up hills or pulling heavy equipment than 1980 Toyota Cressida.

Compare all specifications:

1971 Holden Monaro 1980 Toyota Cressida
Make Holden Toyota
Model Monaro Cressida
Year Released 1971 1980
Engine Position Front Front
Engine Size 4141 cc 2187 cc
Engine Cylinders 8 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 182 HP 66 HP
Engine RPM 4400 RPM 4200 RPM
Torque 356 Nm 132 Nm
Torque RPM 2400 RPM 2400 RPM
Fuel Type Gasoline Diesel
Drive Type Rear Rear
Vehicle Weight 1380 kg 1260 kg
Vehicle Length 4770 mm 4650 mm
Vehicle Width 1890 mm 1700 mm
Vehicle Height 1360 mm 1450 mm
Wheelbase Size 2830 mm 2650 mm