1971 Holden Monaro vs. 1999 Citroen Xantia
To start off, 1999 Citroen Xantia is newer by 28 year(s). Which means there will be less support and parts availability for 1971 Holden Monaro. In addition, the cost of maintenance, including insurance, on 1971 Holden Monaro would be higher. At 5,040 cc (8 cylinders), 1971 Holden Monaro is equipped with a bigger engine. In terms of performance, 1971 Holden Monaro (238 HP @ 4600 RPM) has 129 more horse power than 1999 Citroen Xantia. (109 HP @ 5500 RPM). In normal driving conditions, 1971 Holden Monaro should accelerate faster than 1999 Citroen Xantia. With that said, vehicle weight also plays an important factor in acceleration. 1971 Holden Monaro weights approximately 120 kg more than 1999 Citroen Xantia. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1971 Holden Monaro is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1971 Holden Monaro. However, in wet, icy, snow, or gravel driving conditions, 1999 Citroen Xantia, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1971 Holden Monaro (427 Nm @ 3000 RPM) has 266 more torque (in Nm) than 1999 Citroen Xantia. (161 Nm @ 4250 RPM). This means 1971 Holden Monaro will have an easier job in driving up hills or pulling heavy equipment than 1999 Citroen Xantia. 1999 Citroen Xantia has automatic transmission and 1971 Holden Monaro has manual transmission. 1971 Holden Monaro will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1999 Citroen Xantia will be easier to drive especially in heavy traffic.
Compare all specifications:
| 1971 Holden Monaro | 1999 Citroen Xantia | |
| Make | Holden | Citroen |
| Model | Monaro | Xantia |
| Year Released | 1971 | 1999 |
| Engine Position | Front | Front |
| Engine Size | 5040 cc | 1761 cc |
| Engine Cylinders | 8 cylinders | 4 cylinders |
| Engine Type | in-line | in-line |
| Horse Power | 238 HP | 109 HP |
| Engine RPM | 4600 RPM | 5500 RPM |
| Torque | 427 Nm | 161 Nm |
| Torque RPM | 3000 RPM | 4250 RPM |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | Rear | Front |
| Transmission Type | Manual | Automatic |
| Vehicle Weight | 1380 kg | 1260 kg |
| Vehicle Length | 4770 mm | 4450 mm |
| Vehicle Width | 1890 mm | 1770 mm |
| Vehicle Height | 1360 mm | 1410 mm |
| Wheelbase Size | 2830 mm | 2750 mm |
