1971 Holden Monaro vs. 2013 GMC Sierra

To start off, 2013 GMC Sierra is newer by 42 year(s). Which means there will be less support and parts availability for 1971 Holden Monaro. In addition, the cost of maintenance, including insurance, on 1971 Holden Monaro would be higher. At 6,200 cc (8 cylinders), 2013 GMC Sierra is equipped with a bigger engine. In terms of performance, 2013 GMC Sierra (397 HP @ 5700 RPM) has 215 more horse power than 1971 Holden Monaro. (182 HP @ 4400 RPM) In normal driving conditions, 2013 GMC Sierra should accelerate faster than 1971 Holden Monaro. With that said, vehicle weight also plays an important factor in acceleration. 2013 GMC Sierra weights approximately 1059 kg more than 1971 Holden Monaro. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2013 GMC Sierra is all wheel drive (AWD), it will have significant more traction and grip than 1971 Holden Monaro. In wet, icy, snow, or gravel driving conditions, 2013 GMC Sierra will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2013 GMC Sierra (565 Nm @ 4300 RPM) has 209 more torque (in Nm) than 1971 Holden Monaro. (356 Nm @ 2400 RPM). This means 2013 GMC Sierra will have an easier job in driving up hills or pulling heavy equipment than 1971 Holden Monaro.

Compare all specifications:

1971 Holden Monaro 2013 GMC Sierra
Make Holden GMC
Model Monaro Sierra
Year Released 1971 2013
Engine Position Front Front
Engine Size 4141 cc 6200 cc
Engine Cylinders 8 cylinders 8 cylinders
Engine Type in-line V
Horse Power 182 HP 397 HP
Engine RPM 4400 RPM 5700 RPM
Torque 356 Nm 565 Nm
Torque RPM 2400 RPM 4300 RPM
Fuel Type Gasoline Flex Fuel
Drive Type Rear AWD
Vehicle Weight 1380 kg 2439 kg
Vehicle Length 4770 mm 5847 mm
Vehicle Width 1890 mm 2032 mm
Vehicle Height 1360 mm 1872 mm
Wheelbase Size 2830 mm 3645 mm