1971 Holden Statesman vs. 2010 Maybach 62

To start off, 2010 Maybach 62 is newer by 39 year(s). Which means there will be less support and parts availability for 1971 Holden Statesman. In addition, the cost of maintenance, including insurance, on 1971 Holden Statesman would be higher. At 5,500 cc (12 cylinders), 2010 Maybach 62 is equipped with a bigger engine. In terms of performance, 2010 Maybach 62 (543 HP @ 5250 RPM) has 361 more horse power than 1971 Holden Statesman. (182 HP @ 4400 RPM) In normal driving conditions, 2010 Maybach 62 should accelerate faster than 1971 Holden Statesman. With that said, vehicle weight also plays an important factor in acceleration. 2010 Maybach 62 weights approximately 1446 kg more than 1971 Holden Statesman. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Maybach 62 (899 Nm @ 2200 RPM) has 543 more torque (in Nm) than 1971 Holden Statesman. (356 Nm @ 2400 RPM). This means 2010 Maybach 62 will have an easier job in driving up hills or pulling heavy equipment than 1971 Holden Statesman.

Compare all specifications:

1971 Holden Statesman 2010 Maybach 62
Make Holden Maybach
Model Statesman 62
Year Released 1971 2010
Engine Position Front Front
Engine Size 4140 cc 5500 cc
Engine Cylinders 8 cylinders 12 cylinders
Engine Type in-line V
Horse Power 182 HP 543 HP
Engine RPM 4400 RPM 5250 RPM
Torque 356 Nm 899 Nm
Torque RPM 2400 RPM 2200 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Vehicle Weight 1430 kg 2876 kg
Vehicle Length 5040 mm 6165 mm
Vehicle Width 1890 mm 1981 mm
Vehicle Height 1380 mm 1575 mm
Wheelbase Size 2900 mm 3828 mm