1971 Jensen Interceptor vs. 2000 Seat Toledo
To start off, 2000 Seat Toledo is newer by 29 year(s). Which means there will be less support and parts availability for 1971 Jensen Interceptor. In addition, the cost of maintenance, including insurance, on 1971 Jensen Interceptor would be higher. At 6,286 cc (8 cylinders), 1971 Jensen Interceptor is equipped with a bigger engine. In terms of performance, 1971 Jensen Interceptor (300 HP @ 4800 RPM) has 200 more horse power than 2000 Seat Toledo. (100 HP @ 5600 RPM). In normal driving conditions, 1971 Jensen Interceptor should accelerate faster than 2000 Seat Toledo. With that said, vehicle weight also plays an important factor in acceleration. 1971 Jensen Interceptor weights approximately 664 kg more than 2000 Seat Toledo. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1971 Jensen Interceptor is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1971 Jensen Interceptor. However, in wet, icy, snow, or gravel driving conditions, 2000 Seat Toledo, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1971 Jensen Interceptor (556 Nm @ 3400 RPM) has 411 more torque (in Nm) than 2000 Seat Toledo. (145 Nm @ 3800 RPM). This means 1971 Jensen Interceptor will have an easier job in driving up hills or pulling heavy equipment than 2000 Seat Toledo. 1971 Jensen Interceptor has automatic transmission and 2000 Seat Toledo has manual transmission. 2000 Seat Toledo will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1971 Jensen Interceptor will be easier to drive especially in heavy traffic.
Compare all specifications:
1971 Jensen Interceptor | 2000 Seat Toledo | |
Make | Jensen | Seat |
Model | Interceptor | Toledo |
Year Released | 1971 | 2000 |
Engine Position | Front | Front |
Engine Size | 6286 cc | 1595 cc |
Engine Cylinders | 8 cylinders | 4 cylinders |
Engine Type | V | in-line |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 300 HP | 100 HP |
Engine RPM | 4800 RPM | 5600 RPM |
Torque | 556 Nm | 145 Nm |
Torque RPM | 3400 RPM | 3800 RPM |
Engine Bore Size | 108 mm | 81 mm |
Engine Stroke Size | 85.9 mm | 77.4 mm |
Engine Compression Ratio | 8.5:1 | 10.5:1 |
Drive Type | Rear | Front |
Transmission Type | Automatic | Manual |
Number of Seats | 4 seats | 5 seats |
Number of Doors | 2 doors | 5 doors |
Vehicle Weight | 1814 kg | 1150 kg |
Vehicle Length | 4780 mm | 4450 mm |
Vehicle Width | 1760 mm | 1750 mm |
Vehicle Height | 1350 mm | 1460 mm |
Wheelbase Size | 2670 mm | 2520 mm |
Fuel Tank Capacity | 90 L | 55 L |