1971 Jensen Interceptor vs. 2010 Alfa Romeo 159
To start off, 2010 Alfa Romeo 159 is newer by 39 year(s). Which means there will be less support and parts availability for 1971 Jensen Interceptor. In addition, the cost of maintenance, including insurance, on 1971 Jensen Interceptor would be higher. At 6,286 cc (8 cylinders), 1971 Jensen Interceptor is equipped with a bigger engine. In terms of performance, 1971 Jensen Interceptor (300 HP @ 4800 RPM) has 142 more horse power than 2010 Alfa Romeo 159. (158 HP @ 6500 RPM). In normal driving conditions, 1971 Jensen Interceptor should accelerate faster than 2010 Alfa Romeo 159. With that said, vehicle weight also plays an important factor in acceleration. 1971 Jensen Interceptor weights approximately 259 kg more than 2010 Alfa Romeo 159. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1971 Jensen Interceptor is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1971 Jensen Interceptor. However, in wet, icy, snow, or gravel driving conditions, 2010 Alfa Romeo 159, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1971 Jensen Interceptor (556 Nm @ 3400 RPM) has 366 more torque (in Nm) than 2010 Alfa Romeo 159. (190 Nm @ 4500 RPM). This means 1971 Jensen Interceptor will have an easier job in driving up hills or pulling heavy equipment than 2010 Alfa Romeo 159. 1971 Jensen Interceptor has automatic transmission and 2010 Alfa Romeo 159 has manual transmission. 2010 Alfa Romeo 159 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1971 Jensen Interceptor will be easier to drive especially in heavy traffic.
Compare all specifications:
| 1971 Jensen Interceptor | 2010 Alfa Romeo 159 | |
| Make | Jensen | Alfa Romeo |
| Model | Interceptor | 159 |
| Year Released | 1971 | 2010 |
| Engine Position | Front | Front |
| Engine Size | 6286 cc | 1859 cc |
| Engine Cylinders | 8 cylinders | 4 cylinders |
| Engine Type | V | in-line |
| Valves per Cylinder | 2 valves | 4 valves |
| Horse Power | 300 HP | 158 HP |
| Engine RPM | 4800 RPM | 6500 RPM |
| Torque | 556 Nm | 190 Nm |
| Torque RPM | 3400 RPM | 4500 RPM |
| Engine Bore Size | 108 mm | 86 mm |
| Engine Stroke Size | 85.9 mm | 80 mm |
| Engine Compression Ratio | 8.5:1 | 11.3:1 |
| Top Speed | 217 km/hour | 212 km/hour |
| Drive Type | Rear | Front |
| Transmission Type | Automatic | Manual |
| Number of Seats | 4 seats | 5 seats |
| Number of Doors | 2 doors | 4 doors |
| Vehicle Weight | 1814 kg | 1555 kg |
| Vehicle Length | 4780 mm | 4670 mm |
| Vehicle Width | 1760 mm | 1830 mm |
| Vehicle Height | 1350 mm | 1420 mm |
| Wheelbase Size | 2670 mm | 2710 mm |
| Fuel Tank Capacity | 90 L | 70 L |
