1971 Jensen Interceptor vs. 2010 Nissan Frontier

To start off, 2010 Nissan Frontier is newer by 39 year(s). Which means there will be less support and parts availability for 1971 Jensen Interceptor. In addition, the cost of maintenance, including insurance, on 1971 Jensen Interceptor would be higher. At 6,286 cc (8 cylinders), 1971 Jensen Interceptor is equipped with a bigger engine. In terms of performance, 1971 Jensen Interceptor (300 HP @ 4800 RPM) has 39 more horse power than 2010 Nissan Frontier. (261 HP @ 5600 RPM). In normal driving conditions, 1971 Jensen Interceptor should accelerate faster than 2010 Nissan Frontier. With that said, vehicle weight also plays an important factor in acceleration. 1971 Jensen Interceptor weights approximately 586 kg more than 2010 Nissan Frontier. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2010 Nissan Frontier is four wheel drive (4WD), it will have significant more traction and grip than 1971 Jensen Interceptor. In wet, icy, snow, or gravel driving conditions, 2010 Nissan Frontier will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1971 Jensen Interceptor (556 Nm @ 3400 RPM) has 175 more torque (in Nm) than 2010 Nissan Frontier. (381 Nm @ 4000 RPM). This means 1971 Jensen Interceptor will have an easier job in driving up hills or pulling heavy equipment than 2010 Nissan Frontier. 1971 Jensen Interceptor has automatic transmission and 2010 Nissan Frontier has manual transmission. 2010 Nissan Frontier will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1971 Jensen Interceptor will be easier to drive especially in heavy traffic.

Compare all specifications:

1971 Jensen Interceptor 2010 Nissan Frontier
Make Jensen Nissan
Model Interceptor Frontier
Year Released 1971 2010
Engine Position Front Front
Engine Size 6286 cc 3954 cc
Engine Cylinders 8 cylinders 6 cylinders
Engine Type V V
Valves per Cylinder 2 valves 4 valves
Horse Power 300 HP 261 HP
Engine RPM 4800 RPM 5600 RPM
Torque 556 Nm 381 Nm
Torque RPM 3400 RPM 4000 RPM
Engine Compression Ratio 8.5:1 16.5:1
Drive Type Rear 4WD
Transmission Type Automatic Manual
Number of Seats 4 seats 5 seats
Number of Doors 2 doors 4 doors
Vehicle Weight 1814 kg 1228 kg
Vehicle Length 4780 mm 5230 mm
Vehicle Width 1760 mm 1860 mm
Vehicle Height 1350 mm 1790 mm
Wheelbase Size 2670 mm 3200 mm
Fuel Tank Capacity 90 L 80 L


 

More Comparisons

Resources

Replacing Your Front Disc Brakes Made Simple: The Definitive DIY Guide
Replace the front disc brakes of your vehicle and save money on labour cost. Read this guide to learn how. [read more]
What to look for when buying a used/second hand car.
Diligence through every step of the buying process will help you find a reliable used car and avoid any unpleasant surprises. [read more]
Step-by-Step Guide on How to Perform an Oil Change on Your Car
One of the most effective ways of saving money on car maintenance is to change the oil yourself. [read more]