1971 Jensen Interceptor vs. 2013 Kia RIO
To start off, 2013 Kia RIO is newer by 42 year(s). Which means there will be less support and parts availability for 1971 Jensen Interceptor. In addition, the cost of maintenance, including insurance, on 1971 Jensen Interceptor would be higher. At 6,286 cc (8 cylinders), 1971 Jensen Interceptor is equipped with a bigger engine. In terms of performance, 1971 Jensen Interceptor (300 HP @ 4800 RPM) has 164 more horse power than 2013 Kia RIO. (136 HP @ 6300 RPM). In normal driving conditions, 1971 Jensen Interceptor should accelerate faster than 2013 Kia RIO. With that said, vehicle weight also plays an important factor in acceleration. 1971 Jensen Interceptor weights approximately 718 kg more than 2013 Kia RIO. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1971 Jensen Interceptor is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1971 Jensen Interceptor. However, in wet, icy, snow, or gravel driving conditions, 2013 Kia RIO, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1971 Jensen Interceptor (556 Nm @ 3400 RPM) has 389 more torque (in Nm) than 2013 Kia RIO. (167 Nm @ 4850 RPM). This means 1971 Jensen Interceptor will have an easier job in driving up hills or pulling heavy equipment than 2013 Kia RIO. 1971 Jensen Interceptor has automatic transmission and 2013 Kia RIO has manual transmission. 2013 Kia RIO will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1971 Jensen Interceptor will be easier to drive especially in heavy traffic.
Compare all specifications:
1971 Jensen Interceptor | 2013 Kia RIO | |
Make | Jensen | Kia |
Model | Interceptor | RIO |
Year Released | 1971 | 2013 |
Engine Position | Front | Front |
Engine Size | 6286 cc | 1600 cc |
Engine Cylinders | 8 cylinders | 4 cylinders |
Engine Type | V | in-line |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 300 HP | 136 HP |
Engine RPM | 4800 RPM | 6300 RPM |
Torque | 556 Nm | 167 Nm |
Torque RPM | 3400 RPM | 4850 RPM |
Engine Bore Size | 108 mm | 77 mm |
Engine Stroke Size | 85.9 mm | 85 mm |
Drive Type | Rear | Front |
Transmission Type | Automatic | 6-speed manual |
Number of Seats | 4 seats | 5 seats |
Number of Doors | 2 doors | 5 doors |
Vehicle Weight | 1814 kg | 1096 kg |
Vehicle Length | 4780 mm | 4045 mm |
Vehicle Width | 1760 mm | 1720 mm |
Vehicle Height | 1350 mm | 1455 mm |
Wheelbase Size | 2670 mm | 2570 mm |
Fuel Tank Capacity | 90 L | 43 L |