1971 Lancia 2000 vs. 2013 BMW 7 Series

To start off, 2013 BMW 7 Series is newer by 42 year(s). Which means there will be less support and parts availability for 1971 Lancia 2000. In addition, the cost of maintenance, including insurance, on 1971 Lancia 2000 would be higher. At 5,972 cc (12 cylinders), 2013 BMW 7 Series is equipped with a bigger engine. In terms of performance, 2013 BMW 7 Series (528 HP @ 5250 RPM) has 412 more horse power than 1971 Lancia 2000. (116 HP @ 5500 RPM) In normal driving conditions, 2013 BMW 7 Series should accelerate faster than 1971 Lancia 2000. With that said, vehicle weight also plays an important factor in acceleration. 2013 BMW 7 Series weights approximately 1085 kg more than 1971 Lancia 2000. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2013 BMW 7 Series is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2013 BMW 7 Series. However, in wet, icy, snow, or gravel driving conditions, 1971 Lancia 2000, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2013 BMW 7 Series (746 Nm @ 5000 RPM) has 576 more torque (in Nm) than 1971 Lancia 2000. (170 Nm @ 3500 RPM). This means 2013 BMW 7 Series will have an easier job in driving up hills or pulling heavy equipment than 1971 Lancia 2000. 2013 BMW 7 Series has automatic transmission and 1971 Lancia 2000 has manual transmission. 1971 Lancia 2000 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2013 BMW 7 Series will be easier to drive especially in heavy traffic.

Compare all specifications:

1971 Lancia 2000 2013 BMW 7 Series
Make Lancia BMW
Model 2000 7 Series
Year Released 1971 2013
Body Type Coupe Sedan
Engine Position Front Front
Engine Size 1993 cc 5972 cc
Engine Cylinders 4 cylinders 12 cylinders
Engine Type in-line V
Horse Power 116 HP 528 HP
Engine RPM 5500 RPM 5250 RPM
Torque 170 Nm 746 Nm
Torque RPM 3500 RPM 5000 RPM
Engine Bore Size 84 mm 89 mm
Engine Stroke Size 90 mm 80 mm
Engine Compression Ratio 8.9:1 10.0 :1
Fuel Type Gasoline Gasoline
Drive Type Front Rear
Transmission Type Manual 8-speed automatic
Number of Seats 4 seats 5 seats
Vehicle Weight 1190 kg 2275 kg
Vehicle Length 4550 mm 5214 mm
Vehicle Width 1620 mm 2134 mm
Vehicle Height 1340 mm 1481 mm
Wheelbase Size 2490 mm 3210 mm