1971 Matra-Simca M530 vs. 1975 Zastava 2101
To start off, 1975 Zastava 2101 is newer by 4 year(s). Which means there will be less support and parts availability for 1971 Matra-Simca M530. In addition, the cost of maintenance, including insurance, on 1971 Matra-Simca M530 would be higher. At 1,699 cc (4 cylinders), 1971 Matra-Simca M530 is equipped with a bigger engine. In terms of performance, 1971 Matra-Simca M530 (71 HP @ 4800 RPM) has 9 more horse power than 1975 Zastava 2101. (62 HP @ 5600 RPM). In normal driving conditions, 1971 Matra-Simca M530 should accelerate faster than 1975 Zastava 2101. With that said, vehicle weight also plays an important factor in acceleration. 1975 Zastava 2101 weights approximately 25 kg more than 1971 Matra-Simca M530.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1971 Matra-Simca M530 (128 Nm @ 2800 RPM) has 40 more torque (in Nm) than 1975 Zastava 2101. (88 Nm @ 3400 RPM). This means 1971 Matra-Simca M530 will have an easier job in driving up hills or pulling heavy equipment than 1975 Zastava 2101.
Compare all specifications:
1971 Matra-Simca M530 | 1975 Zastava 2101 | |
Make | Matra-Simca | Zastava |
Model | M530 | 2101 |
Year Released | 1971 | 1975 |
Engine Size | 1699 cc | 1198 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | V | in-line |
Horse Power | 71 HP | 62 HP |
Engine RPM | 4800 RPM | 5600 RPM |
Torque | 128 Nm | 88 Nm |
Torque RPM | 2800 RPM | 3400 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Rear |
Transmission Type | Manual | Manual |
Vehicle Weight | 935 kg | 960 kg |
Vehicle Length | 4200 mm | 4080 mm |
Vehicle Width | 1630 mm | 1620 mm |
Vehicle Height | 1210 mm | 1450 mm |
Wheelbase Size | 2570 mm | 2430 mm |