1972 AC 428 vs. 1960 Morgan 4

To start off, 1972 AC 428 is newer by 12 year(s). Which means there will be less support and parts availability for 1960 Morgan 4. In addition, the cost of maintenance, including insurance, on 1960 Morgan 4 would be higher. At 7,003 cc (8 cylinders), 1972 AC 428 is equipped with a bigger engine. In terms of performance, 1972 AC 428 (298 HP @ 4600 RPM) has 264 more horse power than 1960 Morgan 4. (34 HP @ 5000 RPM). In normal driving conditions, 1972 AC 428 should accelerate faster than 1960 Morgan 4. With that said, vehicle weight also plays an important factor in acceleration. 1972 AC 428 weights approximately 754 kg more than 1960 Morgan 4. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1972 AC 428 (639 Nm @ 2800 RPM) has 567 more torque (in Nm) than 1960 Morgan 4. (72 Nm @ 2700 RPM). This means 1972 AC 428 will have an easier job in driving up hills or pulling heavy equipment than 1960 Morgan 4.

Compare all specifications:

1972 AC 428 1960 Morgan 4
Make AC Morgan
Model 428 4
Year Released 1972 1960
Engine Position Front Front
Engine Size 7003 cc 997 cc
Engine Cylinders 8 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 298 HP 34 HP
Engine RPM 4600 RPM 5000 RPM
Torque 639 Nm 72 Nm
Torque RPM 2800 RPM 2700 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Transmission Type Manual Manual
Vehicle Weight 1434 kg 680 kg
Vehicle Length 4430 mm 3670 mm
Vehicle Width 1710 mm 1430 mm
Vehicle Height 1310 mm 1300 mm
Wheelbase Size 2450 mm 2450 mm