1972 Austin 2200 vs. 2010 Chevrolet Silverado

To start off, 2010 Chevrolet Silverado is newer by 38 year(s). Which means there will be less support and parts availability for 1972 Austin 2200. In addition, the cost of maintenance, including insurance, on 1972 Austin 2200 would be higher. At 5,999 cc (8 cylinders), 2010 Chevrolet Silverado is equipped with a bigger engine. In terms of performance, 2010 Chevrolet Silverado (360 HP @ 5400 RPM) has 250 more horse power than 1972 Austin 2200. (110 HP @ 5250 RPM) In normal driving conditions, 2010 Chevrolet Silverado should accelerate faster than 1972 Austin 2200. With that said, vehicle weight also plays an important factor in acceleration. 2010 Chevrolet Silverado weights approximately 368 kg more than 1972 Austin 2200. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Chevrolet Silverado (515 Nm @ 4200 RPM) has 346 more torque (in Nm) than 1972 Austin 2200. (169 Nm @ 3500 RPM). This means 2010 Chevrolet Silverado will have an easier job in driving up hills or pulling heavy equipment than 1972 Austin 2200. 2010 Chevrolet Silverado has automatic transmission and 1972 Austin 2200 has manual transmission. 1972 Austin 2200 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Chevrolet Silverado will be easier to drive especially in heavy traffic.

Compare all specifications:

1972 Austin 2200 2010 Chevrolet Silverado
Make Austin Chevrolet
Model 2200 Silverado
Year Released 1972 2010
Engine Position Front Front
Engine Size 2227 cc 5999 cc
Engine Cylinders 6 cylinders 8 cylinders
Engine Type in-line V
Horse Power 110 HP 360 HP
Engine RPM 5250 RPM 5400 RPM
Torque 169 Nm 515 Nm
Torque RPM 3500 RPM 4200 RPM
Engine Compression Ratio 9.0:1 10.0:1
Drive Type Rear Rear
Transmission Type Manual Automatic
Number of Seats 5 seats 5 seats
Vehicle Weight 1181 kg 1549 kg
Vehicle Length 4250 mm 5860 mm
Vehicle Width 1450 mm 2040 mm
Vehicle Height 1440 mm 1960 mm
Wheelbase Size 2700 mm 3650 mm
Fuel Tank Capacity 56 L 98 L