1972 Austin 2200 vs. 2010 Jeep Commander

To start off, 2010 Jeep Commander is newer by 38 year(s). Which means there will be less support and parts availability for 1972 Austin 2200. In addition, the cost of maintenance, including insurance, on 1972 Austin 2200 would be higher. At 3,701 cc (6 cylinders), 2010 Jeep Commander is equipped with a bigger engine. In terms of performance, 2010 Jeep Commander (210 HP @ 5200 RPM) has 100 more horse power than 1972 Austin 2200. (110 HP @ 5250 RPM) In normal driving conditions, 2010 Jeep Commander should accelerate faster than 1972 Austin 2200. With that said, vehicle weight also plays an important factor in acceleration. 2010 Jeep Commander weights approximately 862 kg more than 1972 Austin 2200. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2010 Jeep Commander is four wheel drive (4WD), it will have significant more traction and grip than 1972 Austin 2200. In wet, icy, snow, or gravel driving conditions, 2010 Jeep Commander will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Jeep Commander (319 Nm @ 4000 RPM) has 150 more torque (in Nm) than 1972 Austin 2200. (169 Nm @ 3500 RPM). This means 2010 Jeep Commander will have an easier job in driving up hills or pulling heavy equipment than 1972 Austin 2200. 2010 Jeep Commander has automatic transmission and 1972 Austin 2200 has manual transmission. 1972 Austin 2200 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Jeep Commander will be easier to drive especially in heavy traffic.

Compare all specifications:

1972 Austin 2200 2010 Jeep Commander
Make Austin Jeep
Model 2200 Commander
Year Released 1972 2010
Engine Position Front Front
Engine Size 2227 cc 3701 cc
Engine Cylinders 6 cylinders 6 cylinders
Engine Type in-line V
Horse Power 110 HP 210 HP
Engine RPM 5250 RPM 5200 RPM
Torque 169 Nm 319 Nm
Torque RPM 3500 RPM 4000 RPM
Engine Compression Ratio 9.0:1 9.6:1
Drive Type Rear 4WD
Transmission Type Manual Automatic
Number of Seats 5 seats 5 seats
Vehicle Weight 1181 kg 2043 kg
Vehicle Length 4250 mm 4790 mm
Vehicle Width 1450 mm 1910 mm
Vehicle Height 1440 mm 1840 mm
Wheelbase Size 2700 mm 2790 mm
Fuel Tank Capacity 56 L 80 L