1972 Austin Maxi vs. 2008 Ford Bantam
To start off, 2008 Ford Bantam is newer by 36 year(s). Which means there will be less support and parts availability for 1972 Austin Maxi. In addition, the cost of maintenance, including insurance, on 1972 Austin Maxi would be higher. At 1,748 cc (4 cylinders), 1972 Austin Maxi is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 1972 Austin Maxi weights approximately 40 kg more than 2008 Ford Bantam.
Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1972 Austin Maxi (145 Nm @ 3500 RPM) has 35 more torque (in Nm) than 2008 Ford Bantam. (110 Nm @ 3000 RPM). This means 1972 Austin Maxi will have an easier job in driving up hills or pulling heavy equipment than 2008 Ford Bantam.
Compare all specifications:
1972 Austin Maxi | 2008 Ford Bantam | |
Make | Austin | Ford |
Model | Maxi | Bantam |
Year Released | 1972 | 2008 |
Engine Position | Front | Front |
Engine Size | 1748 cc | 1297 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 95 HP | 0 HP |
Torque | 145 Nm | 110 Nm |
Torque RPM | 3500 RPM | 3000 RPM |
Engine Compression Ratio | 9.5:1 | 10.2:1 |
Top Speed | 158 km/hour | 158 km/hour |
Drive Type | Front | Front |
Transmission Type | Manual | Manual |
Number of Seats | 5 seats | 2 seats |
Vehicle Weight | 1000 kg | 960 kg |
Vehicle Length | 4020 mm | 4280 mm |
Vehicle Width | 1640 mm | 1470 mm |
Vehicle Height | 1390 mm | 1640 mm |
Wheelbase Size | 2650 mm | 2670 mm |
Fuel Tank Capacity | 40 L | 54 L |