1972 Austin Maxi vs. 2010 Nissan NP300
To start off, 2010 Nissan NP300 is newer by 38 year(s). Which means there will be less support and parts availability for 1972 Austin Maxi. In addition, the cost of maintenance, including insurance, on 1972 Austin Maxi would be higher. At 2,486 cc (4 cylinders), 2010 Nissan NP300 is equipped with a bigger engine. In terms of performance, 2010 Nissan NP300 (131 HP @ 3500 RPM) has 36 more horse power than 1972 Austin Maxi. (95 HP @ 5350 RPM) In normal driving conditions, 2010 Nissan NP300 should accelerate faster than 1972 Austin Maxi.
Because 2010 Nissan NP300 is four wheel drive (4WD), it will have significant more traction and grip than 1972 Austin Maxi. In wet, icy, snow, or gravel driving conditions, 2010 Nissan NP300 will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Nissan NP300 (304 Nm @ 2000 RPM) has 159 more torque (in Nm) than 1972 Austin Maxi. (145 Nm @ 3500 RPM). This means 2010 Nissan NP300 will have an easier job in driving up hills or pulling heavy equipment than 1972 Austin Maxi.
Compare all specifications:
| 1972 Austin Maxi | 2010 Nissan NP300 | |
| Make | Austin | Nissan |
| Model | Maxi | NP300 |
| Year Released | 1972 | 2010 |
| Engine Position | Front | Front |
| Engine Size | 1748 cc | 2486 cc |
| Engine Cylinders | 4 cylinders | 4 cylinders |
| Engine Type | in-line | in-line |
| Horse Power | 95 HP | 131 HP |
| Engine RPM | 5350 RPM | 3500 RPM |
| Torque | 145 Nm | 304 Nm |
| Torque RPM | 3500 RPM | 2000 RPM |
| Engine Compression Ratio | 9.5:1 | 16.5:1 |
| Drive Type | Front | 4WD |
| Transmission Type | Manual | Manual |
| Number of Seats | 5 seats | 2 seats |
| Vehicle Length | 4020 mm | 5180 mm |
| Vehicle Width | 1640 mm | 1700 mm |
| Vehicle Height | 1390 mm | 1630 mm |
| Wheelbase Size | 2650 mm | 2960 mm |
| Fuel Tank Capacity | 40 L | 75 L |
