1972 Chevrolet Corvette vs. 2008 Mercedes-Benz A

To start off, 2008 Mercedes-Benz A is newer by 36 year(s). Which means there will be less support and parts availability for 1972 Chevrolet Corvette. In addition, the cost of maintenance, including insurance, on 1972 Chevrolet Corvette would be higher. At 5,733 cc (8 cylinders), 1972 Chevrolet Corvette is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 1972 Chevrolet Corvette weights approximately 259 kg more than 2008 Mercedes-Benz A.

Because 1972 Chevrolet Corvette is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1972 Chevrolet Corvette. However, in wet, icy, snow, or gravel driving conditions, 2008 Mercedes-Benz A, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1972 Chevrolet Corvette (380 Nm @ 4000 RPM) has 225 more torque (in Nm) than 2008 Mercedes-Benz A. (155 Nm @ 3500 RPM). This means 1972 Chevrolet Corvette will have an easier job in driving up hills or pulling heavy equipment than 2008 Mercedes-Benz A. 2008 Mercedes-Benz A has automatic transmission and 1972 Chevrolet Corvette has manual transmission. 1972 Chevrolet Corvette will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 Mercedes-Benz A will be easier to drive especially in heavy traffic.

Compare all specifications:

1972 Chevrolet Corvette 2008 Mercedes-Benz A
Make Chevrolet Mercedes-Benz
Model Corvette A
Year Released 1972 2008
Body Type Coupe Hatchback
Engine Position Front Front
Engine Size 5733 cc 1699 cc
Engine Cylinders 8 cylinders 4 cylinders
Engine Type V in-line
Valves per Cylinder 2 valves 2 valves
Horse Power 255 HP 0 HP
Torque 380 Nm 155 Nm
Torque RPM 4000 RPM 3500 RPM
Engine Bore Size 101.7 mm 83.1 mm
Engine Stroke Size 88.4 mm 78.5 mm
Engine Compression Ratio 9.0:1 11.0:1
Drive Type Rear Front
Transmission Type Manual Automatic
Number of Seats 2 seats 5 seats
Number of Doors 2 doors 5 doors
Vehicle Weight 1499 kg 1240 kg
Vehicle Length 4640 mm 3840 mm
Vehicle Width 1760 mm 1770 mm
Vehicle Height 1220 mm 1600 mm
Wheelbase Size 2500 mm 2570 mm
Fuel Tank Capacity 68 L 60 L