1972 Chevrolet Impala vs. 2013 Chrysler 200 CONVERTIBLE
To start off, 2013 Chrysler 200 CONVERTIBLE is newer by 41 year(s). Which means there will be less support and parts availability for 1972 Chevrolet Impala. In addition, the cost of maintenance, including insurance, on 1972 Chevrolet Impala would be higher. At 4,093 cc (6 cylinders), 1972 Chevrolet Impala is equipped with a bigger engine. In terms of performance, 2013 Chrysler 200 CONVERTIBLE (279 HP @ 6400 RPM) has 169 more horse power than 1972 Chevrolet Impala. (110 HP @ 3800 RPM) In normal driving conditions, 2013 Chrysler 200 CONVERTIBLE should accelerate faster than 1972 Chevrolet Impala. With that said, vehicle weight also plays an important factor in acceleration. 2013 Chrysler 200 CONVERTIBLE weights approximately 99 kg more than 1972 Chevrolet Impala. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1972 Chevrolet Impala is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1972 Chevrolet Impala. However, in wet, icy, snow, or gravel driving conditions, 2013 Chrysler 200 CONVERTIBLE, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2013 Chrysler 200 CONVERTIBLE (353 Nm @ 4400 RPM) has 97 more torque (in Nm) than 1972 Chevrolet Impala. (256 Nm @ 1600 RPM). This means 2013 Chrysler 200 CONVERTIBLE will have an easier job in driving up hills or pulling heavy equipment than 1972 Chevrolet Impala. 2013 Chrysler 200 CONVERTIBLE has automatic transmission and 1972 Chevrolet Impala has manual transmission. 1972 Chevrolet Impala will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2013 Chrysler 200 CONVERTIBLE will be easier to drive especially in heavy traffic.
Compare all specifications:
| 1972 Chevrolet Impala | 2013 Chrysler 200 CONVERTIBLE | |
| Make | Chevrolet | Chrysler |
| Model | Impala | 200 CONVERTIBLE |
| Year Released | 1972 | 2013 |
| Engine Position | Front | Front |
| Engine Size | 4093 cc | 3600 cc |
| Engine Cylinders | 6 cylinders | 6 cylinders |
| Engine Type | in-line | V |
| Horse Power | 110 HP | 279 HP |
| Engine RPM | 3800 RPM | 6400 RPM |
| Torque | 256 Nm | 353 Nm |
| Torque RPM | 1600 RPM | 4400 RPM |
| Engine Bore Size | 98.2 mm | 96 mm |
| Engine Stroke Size | 89.6 mm | 83 mm |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | Rear | Front |
| Transmission Type | Manual | 6-speed automatic |
| Number of Seats | 5 seats | 5 seats |
| Number of Doors | 2 doors | 4 doors |
| Vehicle Weight | 1715 kg | 1814 kg |
| Vehicle Length | 5600 mm | 4947 mm |
| Vehicle Width | 2030 mm | 2089 mm |
| Vehicle Height | 1370 mm | 1470 mm |
| Wheelbase Size | 3100 mm | 2765 mm |
| Fuel Tank Capacity | 68 L | 64 L |
