1972 Chrysler 160 vs. 2008 Fiat Sedici

To start off, 2008 Fiat Sedici is newer by 36 year(s). Which means there will be less support and parts availability for 1972 Chrysler 160. In addition, the cost of maintenance, including insurance, on 1972 Chrysler 160 would be higher. At 1,910 cc (4 cylinders), 2008 Fiat Sedici is equipped with a bigger engine. In terms of performance, 2008 Fiat Sedici (118 HP @ 3500 RPM) has 39 more horse power than 1972 Chrysler 160. (79 HP @ 5600 RPM) In normal driving conditions, 2008 Fiat Sedici should accelerate faster than 1972 Chrysler 160. With that said, vehicle weight also plays an important factor in acceleration. 2008 Fiat Sedici weights approximately 332 kg more than 1972 Chrysler 160. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2008 Fiat Sedici is four wheel drive (4WD), it will have significant more traction and grip than 1972 Chrysler 160. In wet, icy, snow, or gravel driving conditions, 2008 Fiat Sedici will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Fiat Sedici (280 Nm @ 2000 RPM) has 155 more torque (in Nm) than 1972 Chrysler 160. (125 Nm @ 3000 RPM). This means 2008 Fiat Sedici will have an easier job in driving up hills or pulling heavy equipment than 1972 Chrysler 160.

Compare all specifications:

1972 Chrysler 160 2008 Fiat Sedici
Make Chrysler Fiat
Model 160 Sedici
Year Released 1972 2008
Engine Position Front Front
Engine Size 1639 cc 1910 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 79 HP 118 HP
Engine RPM 5600 RPM 3500 RPM
Torque 125 Nm 280 Nm
Torque RPM 3000 RPM 2000 RPM
Fuel Type Gasoline Diesel
Drive Type Rear 4WD
Vehicle Weight 1068 kg 1400 kg
Vehicle Length 4540 mm 4120 mm
Vehicle Width 1730 mm 1760 mm
Vehicle Height 1440 mm 1630 mm
Wheelbase Size 2680 mm 2510 mm