1972 Chrysler Centura vs. 2010 Mazda CX-7
To start off, 2010 Mazda CX-7 is newer by 38 year(s). Which means there will be less support and parts availability for 1972 Chrysler Centura. In addition, the cost of maintenance, including insurance, on 1972 Chrysler Centura would be higher. At 2,300 cc (4 cylinders), 2010 Mazda CX-7 is equipped with a bigger engine. In terms of performance, 2010 Mazda CX-7 (244 HP @ 5000 RPM) has 126 more horse power than 1972 Chrysler Centura. (118 HP @ 5700 RPM) In normal driving conditions, 2010 Mazda CX-7 should accelerate faster than 1972 Chrysler Centura. With that said, vehicle weight also plays an important factor in acceleration. 2010 Mazda CX-7 weights approximately 603 kg more than 1972 Chrysler Centura. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1972 Chrysler Centura is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1972 Chrysler Centura. However, in wet, icy, snow, or gravel driving conditions, 2010 Mazda CX-7, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Mazda CX-7 (349 Nm @ 2500 RPM) has 174 more torque (in Nm) than 1972 Chrysler Centura. (175 Nm @ 3500 RPM). This means 2010 Mazda CX-7 will have an easier job in driving up hills or pulling heavy equipment than 1972 Chrysler Centura. 2010 Mazda CX-7 has automatic transmission and 1972 Chrysler Centura has manual transmission. 1972 Chrysler Centura will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Mazda CX-7 will be easier to drive especially in heavy traffic.
Compare all specifications:
1972 Chrysler Centura | 2010 Mazda CX-7 | |
Make | Chrysler | Mazda |
Model | Centura | CX-7 |
Year Released | 1972 | 2010 |
Engine Position | Front | Front |
Engine Size | 1981 cc | 2300 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 118 HP | 244 HP |
Engine RPM | 5700 RPM | 5000 RPM |
Torque | 175 Nm | 349 Nm |
Torque RPM | 3500 RPM | 2500 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Number of Seats | 5 seats | 5 seats |
Vehicle Weight | 1115 kg | 1718 kg |
Vehicle Length | 4590 mm | 4681 mm |
Vehicle Width | 1740 mm | 1872 mm |
Vehicle Height | 1440 mm | 1646 mm |
Wheelbase Size | 2680 mm | 2751 mm |