1972 Chrysler Sedan vs. 1976 Holden Belmont

To start off, 1976 Holden Belmont is newer by 4 year(s). Which means there will be less support and parts availability for 1972 Chrysler Sedan. In addition, the cost of maintenance, including insurance, on 1972 Chrysler Sedan would be higher. At 4,342 cc (6 cylinders), 1972 Chrysler Sedan is equipped with a bigger engine. In terms of performance, 1972 Chrysler Sedan (200 HP @ 4800 RPM) has 84 more horse power than 1976 Holden Belmont. (116 HP @ 4400 RPM). In normal driving conditions, 1972 Chrysler Sedan should accelerate faster than 1976 Holden Belmont. With that said, vehicle weight also plays an important factor in acceleration. 1972 Chrysler Sedan weights approximately 195 kg more than 1976 Holden Belmont. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1972 Chrysler Sedan (355 Nm @ 2000 RPM) has 127 more torque (in Nm) than 1976 Holden Belmont. (228 Nm @ 2000 RPM). This means 1972 Chrysler Sedan will have an easier job in driving up hills or pulling heavy equipment than 1976 Holden Belmont.

Compare all specifications:

1972 Chrysler Sedan 1976 Holden Belmont
Make Chrysler Holden
Model Sedan Belmont
Year Released 1972 1976
Engine Position Front Front
Engine Size 4342 cc 2834 cc
Engine Cylinders 6 cylinders 6 cylinders
Engine Type in-line in-line
Horse Power 200 HP 116 HP
Engine RPM 4800 RPM 4400 RPM
Torque 355 Nm 228 Nm
Torque RPM 2000 RPM 2000 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Vehicle Weight 1520 kg 1325 kg
Vehicle Length 5010 mm 4850 mm
Vehicle Width 1890 mm 1890 mm
Vehicle Height 1440 mm 1380 mm
Wheelbase Size 2930 mm 2830 mm