1972 Chrysler Sedan vs. 1983 Toyota Corolla

To start off, 1983 Toyota Corolla is newer by 11 year(s). Which means there will be less support and parts availability for 1972 Chrysler Sedan. In addition, the cost of maintenance, including insurance, on 1972 Chrysler Sedan would be higher. At 5,899 cc (8 cylinders), 1972 Chrysler Sedan is equipped with a bigger engine. In terms of performance, 1972 Chrysler Sedan (252 HP @ 4400 RPM) has 130 more horse power than 1983 Toyota Corolla. (122 HP @ 6600 RPM). In normal driving conditions, 1972 Chrysler Sedan should accelerate faster than 1983 Toyota Corolla. With that said, vehicle weight also plays an important factor in acceleration. 1972 Chrysler Sedan weights approximately 600 kg more than 1983 Toyota Corolla. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1972 Chrysler Sedan (490 Nm @ 2400 RPM) has 347 more torque (in Nm) than 1983 Toyota Corolla. (143 Nm @ 5200 RPM). This means 1972 Chrysler Sedan will have an easier job in driving up hills or pulling heavy equipment than 1983 Toyota Corolla. 1972 Chrysler Sedan has automatic transmission and 1983 Toyota Corolla has manual transmission. 1983 Toyota Corolla will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1972 Chrysler Sedan will be easier to drive especially in heavy traffic.

Compare all specifications:

1972 Chrysler Sedan 1983 Toyota Corolla
Make Chrysler Toyota
Model Sedan Corolla
Year Released 1972 1983
Body Type Sedan Coupe
Engine Position Front Front
Engine Size 5899 cc 1587 cc
Engine Cylinders 8 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 252 HP 122 HP
Engine RPM 4400 RPM 6600 RPM
Torque 490 Nm 143 Nm
Torque RPM 2400 RPM 5200 RPM
Drive Type Rear Rear
Transmission Type Automatic Manual
Number of Doors 4 doors 3 doors
Vehicle Weight 1570 kg 970 kg
Vehicle Length 5010 mm 4190 mm
Vehicle Width 1890 mm 1630 mm
Vehicle Height 1440 mm 1340 mm
Wheelbase Size 2930 mm 2410 mm