1972 Chrysler Sedan vs. 1989 Mercedes-Benz 300
To start off, 1989 Mercedes-Benz 300 is newer by 17 year(s). Which means there will be less support and parts availability for 1972 Chrysler Sedan. In addition, the cost of maintenance, including insurance, on 1972 Chrysler Sedan would be higher. At 5,899 cc (8 cylinders), 1972 Chrysler Sedan is equipped with a bigger engine. In terms of performance, 1972 Chrysler Sedan (252 HP @ 4400 RPM) has 32 more horse power than 1989 Mercedes-Benz 300. (220 HP @ 6400 RPM). In normal driving conditions, 1972 Chrysler Sedan should accelerate faster than 1989 Mercedes-Benz 300. With that said, vehicle weight also plays an important factor in acceleration. 1972 Chrysler Sedan weights approximately 100 kg more than 1989 Mercedes-Benz 300. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1972 Chrysler Sedan (490 Nm @ 2400 RPM) has 225 more torque (in Nm) than 1989 Mercedes-Benz 300. (265 Nm @ 4500 RPM). This means 1972 Chrysler Sedan will have an easier job in driving up hills or pulling heavy equipment than 1989 Mercedes-Benz 300. 1972 Chrysler Sedan has automatic transmission and 1989 Mercedes-Benz 300 has manual transmission. 1989 Mercedes-Benz 300 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1972 Chrysler Sedan will be easier to drive especially in heavy traffic.
Compare all specifications:
1972 Chrysler Sedan | 1989 Mercedes-Benz 300 | |
Make | Chrysler | Mercedes-Benz |
Model | Sedan | 300 |
Year Released | 1972 | 1989 |
Engine Position | Front | Front |
Engine Size | 5899 cc | 2962 cc |
Engine Cylinders | 8 cylinders | 6 cylinders |
Engine Type | in-line | in-line |
Horse Power | 252 HP | 220 HP |
Engine RPM | 4400 RPM | 6400 RPM |
Torque | 490 Nm | 265 Nm |
Torque RPM | 2400 RPM | 4500 RPM |
Drive Type | Rear | Rear |
Transmission Type | Automatic | Manual |
Number of Doors | 4 doors | 2 doors |
Vehicle Weight | 1570 kg | 1470 kg |
Vehicle Length | 5010 mm | 4660 mm |
Vehicle Width | 1890 mm | 1750 mm |
Vehicle Height | 1440 mm | 1430 mm |
Wheelbase Size | 2930 mm | 2720 mm |