1972 Chrysler Sedan vs. 2003 Ford Lynx

To start off, 2003 Ford Lynx is newer by 31 year(s). Which means there will be less support and parts availability for 1972 Chrysler Sedan. In addition, the cost of maintenance, including insurance, on 1972 Chrysler Sedan would be higher. At 4,342 cc (6 cylinders), 1972 Chrysler Sedan is equipped with a bigger engine. In terms of performance, 1972 Chrysler Sedan (200 HP @ 4800 RPM) has 92 more horse power than 2003 Ford Lynx. (108 HP @ 5500 RPM). In normal driving conditions, 1972 Chrysler Sedan should accelerate faster than 2003 Ford Lynx. With that said, vehicle weight also plays an important factor in acceleration. 1972 Chrysler Sedan weights approximately 410 kg more than 2003 Ford Lynx. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1972 Chrysler Sedan is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1972 Chrysler Sedan. However, in wet, icy, snow, or gravel driving conditions, 2003 Ford Lynx, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1972 Chrysler Sedan (355 Nm @ 2000 RPM) has 210 more torque (in Nm) than 2003 Ford Lynx. (145 Nm @ 4000 RPM). This means 1972 Chrysler Sedan will have an easier job in driving up hills or pulling heavy equipment than 2003 Ford Lynx. 1972 Chrysler Sedan has automatic transmission and 2003 Ford Lynx has manual transmission. 2003 Ford Lynx will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1972 Chrysler Sedan will be easier to drive especially in heavy traffic.

Compare all specifications:

1972 Chrysler Sedan 2003 Ford Lynx
Make Chrysler Ford
Model Sedan Lynx
Year Released 1972 2003
Engine Position Front Front
Engine Size 4342 cc 1595 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 200 HP 108 HP
Engine RPM 4800 RPM 5500 RPM
Torque 355 Nm 145 Nm
Torque RPM 2000 RPM 4000 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Front
Transmission Type Automatic Manual
Vehicle Weight 1520 kg 1110 kg
Vehicle Length 5010 mm 4480 mm
Vehicle Width 1890 mm 1700 mm
Vehicle Height 1440 mm 1420 mm
Wheelbase Size 2930 mm 2620 mm