1972 Chrysler Sedan vs. 2003 Mazda 6

To start off, 2003 Mazda 6 is newer by 31 year(s). Which means there will be less support and parts availability for 1972 Chrysler Sedan. In addition, the cost of maintenance, including insurance, on 1972 Chrysler Sedan would be higher. At 5,899 cc (8 cylinders), 1972 Chrysler Sedan is equipped with a bigger engine. In terms of performance, 1972 Chrysler Sedan (252 HP @ 4400 RPM) has 133 more horse power than 2003 Mazda 6. (119 HP @ 5700 RPM). In normal driving conditions, 1972 Chrysler Sedan should accelerate faster than 2003 Mazda 6. With that said, vehicle weight also plays an important factor in acceleration. 1972 Chrysler Sedan weights approximately 150 kg more than 2003 Mazda 6. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1972 Chrysler Sedan is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1972 Chrysler Sedan. However, in wet, icy, snow, or gravel driving conditions, 2003 Mazda 6, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1972 Chrysler Sedan (490 Nm @ 2400 RPM) has 322 more torque (in Nm) than 2003 Mazda 6. (168 Nm @ 4500 RPM). This means 1972 Chrysler Sedan will have an easier job in driving up hills or pulling heavy equipment than 2003 Mazda 6. 1972 Chrysler Sedan has automatic transmission and 2003 Mazda 6 has manual transmission. 2003 Mazda 6 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1972 Chrysler Sedan will be easier to drive especially in heavy traffic.

Compare all specifications:

1972 Chrysler Sedan 2003 Mazda 6
Make Chrysler Mazda
Model Sedan 6
Year Released 1972 2003
Body Type Sedan Station Wagon
Engine Position Front Front
Engine Size 5899 cc 1840 cc
Engine Cylinders 8 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 252 HP 119 HP
Engine RPM 4400 RPM 5700 RPM
Torque 490 Nm 168 Nm
Torque RPM 2400 RPM 4500 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Front
Transmission Type Automatic Manual
Number of Doors 4 doors 5 doors
Vehicle Weight 1570 kg 1420 kg
Vehicle Length 5010 mm 4680 mm
Vehicle Width 1890 mm 1790 mm
Vehicle Height 1440 mm 1440 mm
Wheelbase Size 2930 mm 2680 mm