1972 Chrysler Sedan vs. 2010 Fiat Albea

To start off, 2010 Fiat Albea is newer by 38 year(s). Which means there will be less support and parts availability for 1972 Chrysler Sedan. In addition, the cost of maintenance, including insurance, on 1972 Chrysler Sedan would be higher. At 5,899 cc (8 cylinders), 1972 Chrysler Sedan is equipped with a bigger engine. In terms of performance, 1972 Chrysler Sedan (252 HP @ 4400 RPM) has 176 more horse power than 2010 Fiat Albea. (76 HP @ 6000 RPM). In normal driving conditions, 1972 Chrysler Sedan should accelerate faster than 2010 Fiat Albea. With that said, vehicle weight also plays an important factor in acceleration. 1972 Chrysler Sedan weights approximately 419 kg more than 2010 Fiat Albea. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1972 Chrysler Sedan is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1972 Chrysler Sedan. However, in wet, icy, snow, or gravel driving conditions, 2010 Fiat Albea, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1972 Chrysler Sedan (490 Nm @ 2400 RPM) has 375 more torque (in Nm) than 2010 Fiat Albea. (115 Nm @ 3000 RPM). This means 1972 Chrysler Sedan will have an easier job in driving up hills or pulling heavy equipment than 2010 Fiat Albea. 1972 Chrysler Sedan has automatic transmission and 2010 Fiat Albea has manual transmission. 2010 Fiat Albea will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1972 Chrysler Sedan will be easier to drive especially in heavy traffic.

Compare all specifications:

1972 Chrysler Sedan 2010 Fiat Albea
Make Chrysler Fiat
Model Sedan Albea
Year Released 1972 2010
Body Type Sedan Sedan
Engine Position Front Front
Engine Size 5899 cc 1368 cc
Engine Cylinders 8 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 252 HP 76 HP
Engine RPM 4400 RPM 6000 RPM
Torque 490 Nm 115 Nm
Torque RPM 2400 RPM 3000 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Front
Transmission Type Automatic Manual
Number of Doors 4 doors 4 doors
Vehicle Weight 1570 kg 1151 kg
Vehicle Length 5010 mm 4220 mm
Vehicle Width 1890 mm 1710 mm
Vehicle Height 1440 mm 1500 mm


 

More Comparisons

Resources

Replacing Your Front Disc Brakes Made Simple: The Definitive DIY Guide
Replace the front disc brakes of your vehicle and save money on labour cost. Read this guide to learn how. [read more]
What to look for when buying a used/second hand car.
Diligence through every step of the buying process will help you find a reliable used car and avoid any unpleasant surprises. [read more]
Step-by-Step Guide on How to Perform an Oil Change on Your Car
One of the most effective ways of saving money on car maintenance is to change the oil yourself. [read more]