1972 Chrysler Sedan vs. 2010 Smart ForTwo

To start off, 2010 Smart ForTwo is newer by 38 year(s). Which means there will be less support and parts availability for 1972 Chrysler Sedan. In addition, the cost of maintenance, including insurance, on 1972 Chrysler Sedan would be higher. At 5,899 cc (8 cylinders), 1972 Chrysler Sedan is equipped with a bigger engine. In terms of performance, 1972 Chrysler Sedan (252 HP @ 4400 RPM) has 182 more horse power than 2010 Smart ForTwo. (70 HP @ 5800 RPM). In normal driving conditions, 1972 Chrysler Sedan should accelerate faster than 2010 Smart ForTwo. With that said, vehicle weight also plays an important factor in acceleration. 1972 Chrysler Sedan weights approximately 750 kg more than 2010 Smart ForTwo. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1972 Chrysler Sedan (490 Nm @ 2400 RPM) has 398 more torque (in Nm) than 2010 Smart ForTwo. (92 Nm @ 4500 RPM). This means 1972 Chrysler Sedan will have an easier job in driving up hills or pulling heavy equipment than 2010 Smart ForTwo. 1972 Chrysler Sedan has automatic transmission and 2010 Smart ForTwo has manual transmission. 2010 Smart ForTwo will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1972 Chrysler Sedan will be easier to drive especially in heavy traffic.

Compare all specifications:

1972 Chrysler Sedan 2010 Smart ForTwo
Make Chrysler Smart
Model Sedan ForTwo
Year Released 1972 2010
Body Type Sedan Coupe
Engine Position Front Rear
Engine Size 5899 cc 1000 cc
Engine Cylinders 8 cylinders 3 cylinders
Engine Type in-line in-line
Horse Power 252 HP 70 HP
Engine RPM 4400 RPM 5800 RPM
Torque 490 Nm 92 Nm
Torque RPM 2400 RPM 4500 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Transmission Type Automatic Manual
Number of Doors 4 doors 2 doors
Vehicle Weight 1570 kg 820 kg
Vehicle Length 5010 mm 2695 mm
Vehicle Width 1890 mm 1560 mm
Vehicle Height 1440 mm 1542 mm
Wheelbase Size 2930 mm 1867 mm